Bedienungsanleitung Worx WR105 SI (Seite 19 von 20) (Englisch)

723921

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Owner’s Manual of Lawn Mowing Robot EN

Landroid

is starting to have

shorter run-times between

charges.

Something is clogging in the Blade

Disc.

Take off the Blade Disc and clean it

The grass is too high and too thick.

Landroid

is shaking heavily.

Check the Blade Disc and blades, remove

debris and foreign objects from the blades

and Blade Disc.

The battery may be exhausted or old. Replace battery.

Landroid

is not operating at the

correct time.

The clock is not set to the correct

time.

Set the clock to the correct time by using

App.

Programmed cutting times for

Landroid

are not correct.

Change the time settings for the mower to

start and stop.

Landroid

cannot correctly dock

with the Charging Base

Environmental influences Restart Landroid

Poor connection caused by debris on

the Charging Strip.

Clean the Contact Pins located on the

Charging Base and the Charging Strip on

Landroid

using a cloth.

The Green light on the Charging

Base turns ON before charging

is complete.

The charging base is overheating, the

battery indication light flashes red.

Place the charging base in a shady area or

wait until the temperature has cooled down.

Landroid

runs outside the

boundary wire. Landroid

does

not mow an area within a

boundary wire zone. Landroid

reverses or rotates erratically

near the boundary wire.

The boundary wire of another

Landroid

or another robotic mower is

positioned too closely.

Ensure your Landroid

Boundary Wire has at

least 1m of space between the neighboring

boundary wire.

The boundary wire has been installed

with tight corners.

Check the boundary wire to ensure the

corners are smooth.

In wet conditions, the boundary wire

electric signal may leak were wire has

been joined or repaired.

Check boundary wire joints. Insulate to

provide a fully waterproof connection.

There is boundary wire electric signal

leakage due to broken insulation.

Repair damaged boundary wire insulation

with connectors.

The cutting area is larger than the

allowable cutting area for Landroid

Contact service agent.

Landroid

wheels skid or

damage lawn.

Foreign obstacles, such as twigs

and branches may be lodged under

Landroid

Remove foreign objects from underside of

Landroid

The lawn is too wet. Wait until lawn has dried.

Landroid

exits the boundary

wire due to high speed when

going down a hill.

The Boundary Wire is placed on a

slope steeper than 17% (10°).

Reposition the Boundary Wire away from

slopes that are steeper than 17% (10°).

Please refer installation manual for details.

Environmental Protection

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.

Check with your Local Authority or retailer for recycling advice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WR105 SI Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Worx WR105 SI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info