Bedienungsanleitung Worx WR110 MI (Seite 14 von 20) (Englisch)

723927

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Owner’s Manual of Lawn Mowing Robot EN

9.2 Keep it clean

WARNING: Before cleaning, turn your Landroid

OFF. Put on protective gloves before cleaning

the Blade Turning Disc (13) and do not rinse or flush with water.

A. Cleaning the body

Your Landroid

will live a much happier and longer life if it is cleaned

regularly. Although, since your Landroid

is an electric machine,

you will need to take care when cleaning., DO NOT use a hose,

high pressure washers or otherwise pour running water

on your Landroid

. It is best to use a spray bottle filled with

water. When cleaning the machine body, use a soft brush or clean

cloth and avoid using solvents or polishes (See Fig. N). Lastly,

remove all build up of grass clippings and debris.

B. Cleaning the Underside

Again, it is important that you power the Landroid

OFF and wear

protective gloves before touching the Blade Turning Disc (13).

First, flip your Landroid

upside down to expose its underside.

Here you will see the Blade Disc, the chassis, and the Front Wheel

(11) and Driving Wheels (6). Clean everything thoroughly with a soft

brush or moist rag.

WARNING: NEVER clean the underside of Landroid

with

running water. Component damage can occur. (See Fig. O1, O2)

Rotate the Blade Disc to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove any

obstructions.

IMPORTANT: Remove any lodged debris so that it does not cause a crack in the Blade Disc. Even the

tiniest crack can decrease your Landroid

's mowing output.

C. Clean the contact pins and the charging strips

Clean the Contact Pins (2) located on the Charging Base (3) and the Charging Strips (4) located on the Landroid

using a

cloth. Remove any built up grass clippings or debris around the Contact Pins and charge strips periodically to ensure the

Landroid

successfully charges each time.

9.3

Battery life

The heart of the Landroid

is its 20V Li-Ion Battery. For proper storage of the battery, make sure it is fully charged and kept

in a cool dry place between (20°C- 60°C).

NOTE: The recommend Landroid

operation temperature is between 0-55°C.

The life-span of the Landroid

’s battery depends on various factors, such as:

• The length of the mowing season in your region

• Amount of hours the Landroid

mows per day

• Battery maintenance during storage

Landroid

can be charged manually without the boundary wire.

1. Connect the Charging Base to a suitable power supply. The green light on the Charging Base will

turn on.

2. Manually dock the Landroid

into the Charging Base while the Landroid

is powered off. (See Fig. P1)

3. The green light on the Charging Base will turn to red, and the battery indication light will flash

green and red. (See Fig. P2) Landroid

will begin to charge.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WR110 MI Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Worx WR110 MI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info