Bedienungsanleitung Worx WX163.3 (Seite 12 von 136) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

575041

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Lithium-Ion cordless drill/driver EN

now clamped in the chuck.

6. TORQUE ADJUSTMENT (See Fig. F)

(Screw driving force of your drill driver)

The torque is adjusted by rotating the torque

adjustment ring. The torque is greater when

the torque adjustment ring is set on a higher

setting. The torque is less when the torque

adjustment ring is set on a lower setting.

Make the setting as follows:

1 - 4 for driving small screws

5 - 9

for driving screws into soft mate-

rial

10 - 14

for driving screws into soft and

hard material

15 - 19 for driving screws into hard wood

20 - 23 for driving larger screws

for heavy drilling

7. AUTOMATIC SPINDLE LOCK

(See Fig. G)

The automatic spindle lock allows you to use

it as a regular screwdriver. You can give an

extra twist to ﬁrmly tighten a screw, loosen

a very tight screw or continue working

when the battery energy has expired. For

manual screwdriver purposes, the chuck is

automatically locked when the tool is off.

8. USING THE SIGHT LIGHT

The sight light allows you to keep a clear

view under less illuminated circumstances.

To turn on the light simply press the on/off

switch. When you release the on/off switch,

the light will go out.

9. LEVEL DRILLING (See Fig. H)

The bubble level is recessed in the motor

housing on the top of the drill. It can be

used to keep the drill level during horizontal

drilling operation.

The bubble level is recessed in the motor

housing on the back of the drill. It can be

used to keep the drill level during vertical

drilling operation.

10. DRILLING

When drilling into a hard smooth surface,

use a center punch to mark the desired hole

location. This will prevent the drill bit from

slipping off center as the hole is started. Hold

the tool ﬁrmly and place the tip of the bit at

the point to be drilled. Depress the switch

trigger to start the tool. Move the drill bit

into the workpiece, applying only enough

pressure to keep the bit cutting. Do not force

or apply side pressure to elongate a hole.

Tungsten carbide drill bits should

always be used for concrete and

masonry. When drilling in metal, only

use HSS drill bits in good condition.

Always use a magnetic bit holder (not

included) when using short screwdriver

bits. When screw-driving, apply a small

quantity of liquid soap or similar to the

screw threads to ease insertion.

11. DISPOSAL OF AN EXHAUSTED

BATTERY PACK

To preserve natural resources, please

recycle or dispose of the battery

pack properly. This battery pack

contains Lithium batteries. Consult your local

waste authority for information regarding

available recycling and/or disposal options.

Discharge your battery pack by operating

your drill, then remove the battery pack

from the drill housing and cover the battery

pack connections with heavy-duty adhesive

tape to prevent short circuit and energy

discharge. Do not attempt to open or remove

any of the components.

12. OVERLOAD PROTECTION

When overloaded, the motor comes to

a stop. Relieve the load on the machine

immediately and allow cooling for approx. 30

seconds at the highest no-load speed.

13. TEMPERATURE DEPENDENT

OVERLOAD PROTECTION

When using as intended for the power tool

cannot be subject to overload. When the

load is too high or the allowable battery

temperature of 75°C is exceeded, the

electronic control switches off the power

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX163.3 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info