Bedienungsanleitung Worx WX368 (Seite 11 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

575042

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Lithium-Ion cordless hammer drill EN

3. SWITCH LOCK (See Fig.B)

The switch trigger can be locked in the OFF

position. This helps to reduce the possibility of

accidental starting when not in use. To lock the

switch trigger, place the direction of rotation

selector in the center position.

4. REVERSIBLE (See Fig.B)

For drilling and screw driving use forward

rotation marked “ ” (lever is moved to the

left). Only use reverse rotation marked

“ ” (lever is moved to the right) to remove

screws or release a jammed drill bit.

WARNING: Never change the

direction of rotation when the

chuck is rotating, wait until it has

stopped!

5. TWO-SPEED GEAR CONTROL (See

Fig.C)

The drill has a two-speed gear control (11)

designed for drilling or driving at LO (mark is

1) or HI (mark is 2) speeds. A slide switch is

located on top of the drill to select either LO

or HI speed. When using the drill in the LO

speed range, the speed will decrease and the

drill will have greater power and torque. When

using the drill in the HI speed range, the speed

will increase and the drill will have less power

and torque.

Gear I

Low speed range: for screwdriving or working

with large drilling diameter.

Gear II

High speed range: for working with small

drilling diameter.

WARNING: To prevent gear damage,

always allow the chuck to come

to a complete stop before changing the

direction of rotation or the two-speed

gear train.

6. CHUCK ADJUSTMENT (See Fig.D)

To open the chuck jaws rotate the front section

of the chuck (1). Insert the drill bit between the

chuck jaws and rotate the front section in the

opposite direction. Ensure the drill bit is in the

center of the chuck jaws. Finally, ﬁrmly rotate the

front chuck section in the opposite directions.

Your drill bit is now clamped in the

chuck.

7. TORQUE ADJUSTMENT AND HAMMER

OR DRILLING CONTROL (See Fig.E)

(Screw driving force of your drill driver)

The torque is adjusted by rotating the torque

adjustment ring (2). The torque is greater

when the torque adjustment ring is set on

a higher setting. The torque is less when

the torque adjustment ring is set on a lower

setting.

When drilling in masonry and concrete choose

the hammer position .

When drilling in wood, metal, plastic and

screwdriver choose the drill position .

Make the setting as follows:

1 - 4 for driving small screws

5 - 9

for driving screws into soft

material

10 – 14

for driving screws into soft and

hard material

15 - 19 for driving screws into hard wood

20 for driving larger screws

for heavy drilling

for drilling in masonry and

concrete

8. AUTOMATIC SPINDLE LOCK (See Fig.F)

The automatic spindle lock allows you to

use as a regular screwdriver. You can give an

extra twist to ﬁrmly tighten a screw, loosen

a very tight screw or continue working

when the battery energy has expired. For

manual screwdriver purposes, the chuck is

automatically locked when the tool is off.

9. SIGHT LIGHT

The sight (3) light allows you to keep a clear

view under less illuminated circumstances.

To turn on the light simply press the on/off

switch. When you release the on/off switch,

the light will go out.

10. LEVEL DRILLING (See Fig.G)

The Bubble level (10) is recessed in the motor

housing on the top of the drill. It can be used

to keep the drill level during horizontal drilling

operation.

The Bubble level (10) is recessed in the motor

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX368 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info