Bedienungsanleitung Worx WX424.2 (Seite 10 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

575073

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Mini multi-function saw EN

ADDITIONAL SAFETY

RULES FOR YOUR MINI

MULTI-FUNCTION SAW

1. Always wear a dust mask, hearing

protection and eye protection.

2. Only use saw blades recommended for use

with this model.

3. Always wear gloves when handling saw

blades and rough material. Saw blades

shall be carried in a holder whenever

practicable.

4. Fully unwind cable drum extension to

avoid potential overheating.

5. When an extension cable is required you

must ensure it has the correct ampere

rating for your power tool and is in a safe

electrical condition.

6. Ensure your mains supply voltage is the

same as indicated on the rating plate.

7. Your mini multi-function saw is a hand held

tool, do not clamp your mini multi-function

saw to a workbench.

8. Before cutting, ensure the work piece is

free of nails, screws, etc.

9. Do not cut small work pieces with a mini

multi-function saw. If possible, use a

jigsaw.

10. Only make cuts with the blade direction

downwards, never upwards or at the side.

11. Do not use a blade unless the rated blade

speed exceeds the saw no load speed.

12. Never remove the guard system. Never

use the saw if the guard system does not

function correctly. Never lock the moving

guard open. The guard must move freely.

13. Always check walls, ﬂoors and ceilings to

avoid hidden power cable and pipes.

14. After long working periods external metal

parts and accessories could be hot.

15. Do not cut material containing asbestos.

16. Do not use mini multi-function saw to cut

tree limbs or logs.

17. Do not use any abrasive wheels.

SAFETY INSTRUCTIONS FOR ALL SAWS

WARNING

1. Keep hands away from the cutting

area and the blade. Keep your second

hand on the motor housing. If both

hands are holding the saw, they can not be

cut by the blade.

2. Do not reach underneath the work-

piece. The guard cannot protect you from

the blade below the work-piece.

3. Adjust the cutting depth to the

thickness of the work-piece. Less than

a full tooth of the blade teeth should be

visible below the work-piece.

4. Never hold piece being cut in your

hands or across your leg. Secure the

work-piece to a stable platform. It is

important to support the work properly to

minimize body exposure, blade binding, or

loss of control.

5. Hold power tool by insulated gripping

surfaces when performing an

operation where the cutting tool may

contact hidden wiring or its own cord.

Contact with a “live” wire will lso make

exposed metal parts of the power tool

“live” and shock the operator.

6. When ripping always use a rip fence

or straight edge guide. This improves

the accuracy of cut and reduces the chance

of blade binding.

7. Always use blades with correct size

and shape of arbor holes. Blades that do

not match the mounting hardware of the

saw will run eccentrically, causing loss of

control.

8. Never use damaged or incorrect blade

washers or bolt. The blade washers and

bolt are specially designed for your saw,

for optimum performance and safety of

operation.

FURTHER SAFETY INSTRUCTIONS FOR

ALL SAWS.

CAUSES AND OPERATOR PREVENTION

OF KICKBACK:

- Kickback is a sudden reaction to pinched,

bound or misaligned saw blade, causing an

uncontrolled saw to lift up and out of the

work-piece toward the operator;

- When the blade is pinched or bound tightly

by the work piece being cut, the blade

stalls and the motor reaction drives the unit

rapidly back toward the operator;

- If the blade becomes twisted or misaligned

in the cut, the teeth at the back edge of the

blade can dig into the top surface of the

wood causing the blade to climb out of the

material being cut and jump back toward

the operator.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX424.2 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info