Bedienungsanleitung Worx WX424.3 (Seite 16 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

575074

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Mini multi-function saw EN

produce a straight cut (See Fig. N2,N3).

g) Always let the blade reach full speed, then

carefully guide the saw into the work piece.

Do not bind the blade in the cut. Push the

saw forward at a speed where the blade is

not laboring.

10. PLUNGE OR POCKET CUTTING

(Fig. Oa, Ob, Oc)

Cutting into a solid base surface

One of the major beneﬁts of this saw is its

ability to make plunge cuts directly into the

middle, or interior of a work piece, or plunge

cut directly into a solid base surface such as

sub-ﬂooring, siding, paneling and hardwood

or laminate ﬂooring that is mounted on top of

sub-ﬂooring.

a) Mark the cut line on the surface to be cut.

b) Set the depth of cut to the thickness of

the material to be cut, (sub/ﬂoor, siding,

laminate ﬂooring, etc.)

c) Align (position) the saw base on the work

piece to your mark, using the length of cut

guide (so that your starting point lines up

with the mark corresponding to the depth

of cut setting (See Fig. D).

d) Activate the trigger safety release and

paddle switches and turn the saw “On”.

e) Let the blade reach full speed.

f) Manually release the blade guard release

lever while holding the ﬁnger lift bracket on

the rear of the base (See Fig. Oa).

g) A. Slowly lower the blade into the work

piece.

B. Carefully guide the saw through the line

of cut until the forward depth marking on

the length of cut guide located on the saw’s

base aligns with the end of cut marking on

your work piece. (Do not bind the blade in

the cut; push the saw blade forward at a

rate where the blade is not laboring).

C. When the cut is complete, release the

trigger safety release and paddle switch

and let the blade come to a complete stop.

Do not remove the saw and blade from the

work piece while the blade is moving. This

could damage your cut, cause kickback and

loss of control, resulting in serious injury.

h) When the blade and saw are clear of and

removed from the work piece, the lower

blade guard and base will be able to

automatically drop down and the blade

guard release lever will engage the upper

blade guard, locking the blade above the

base.

11. SAWDUST REMOVAL (See Fig. Q)

Your saw includes a hose adapter tube that

attaches to the built-in dust extraction port (7)

on the saw (See Fig. Q). This adapter tube can

be attached to a wet/dry vacuum cleaner (sold

separately). This will help remove dust, chips

and cutting debris away from the cutting area.

12. NON-SCRATCH BASE COVER

(See Fig. R)

Your saw includes a non-scratch base cover

(19). Attach it to your saw’s base when you are

cutting work pieces that have delicate surfaces

(ﬁnishes) such as vinyls, plastics, ﬁberglass,

laminate ﬂooring and tiles that could easily be

scratched or scraped with the steel base on

the saw.

WORKING HINTS FOR YOUR

TOOL

If your power tool becomes too hot, please

run your circular saw no load for 2-3 minutes

to cool the motor. Avoid prolonged usage at

very low speeds.

Protect saw blades against impact and shock.

Excessive feed signiﬁcantly reduces the

performance capability of the machine and

reduces the service life of the saw blade.

Sawing performance and cutting quality

depend essentially on the condition and the

tooth form of the saw blade. Therefore, use

only sharp saw blades that are suited for the

material to be worked.

MAINTENANCE

Remove the plug from the socket before

carrying out any adjustment, servicing or

maintenance.

Your power tool requires no additional

lubrication or maintenance. There are no user

serviceable parts in your power tool. Never

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX424.3 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info