Bedienungsanleitung Worx WX461 (Seite 9 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

575070

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Jigsaw EN

ADDITIONAL SAFETY

POINTS FOR YOUR JIGSAW

1. Always wear a dust mask.

2. Hold power tool by insulated gripping

surfaces when performing an operation

where the cutting tool may contact hidden

wiring or its own cord. Contact with a” live”

wire will make exposed metal parts of the

tool” live” and shock the operator.

3. Use clamps or another practical way to

secure and support the workpiece to a

stable platform. Holding the work by hand

or against your body leaves it unstable and

may lead to loss of control.

4. Always wear safety glasses or eye

shields when using the jigsaw. Everyday

eyeglasses have only impact-resistant

lenses; they are NOT safety glasses.

Following this rule will reduce the risk of

serious personal injury.

5. Always wear hearing protection during

extended periods of operation. Following

this rule will reduce the risk of serious

personal injury.

6. Keep your hands away from cutting area.

Do not reach under the material being cut

because the nearness of the blade to your

hand is hidden from your sight.

7. Do not use dull or damaged blades. Bent

blades can break easily, or cause kickback.

8. Remove the plug from the socket before

carrying out any adjustment, servicing or

maintenance.

9. Fully unwind cable drum extensions to

avoid potential overheating.

10. When an extension cable is required you

must ensure it has the correct ampere

rating for your power tool and is in a safe

electrical condition.

11. Ensure your mains supply voltage is the

same as indicated on the rating plate.

12. Your tool is double insulated for additional

protection against a possible electrical

insulation failure within the tool.

13. Always check walls, ﬂoors and ceilings to

avoid hidden power cables and pipes.

14. After long working period, external metal

parts and accessories could be hot.

15. Only withdraw the blade from the cut when

the blade has been stopped moving.

16. The pivoting blade foot must be held ﬁrmly

against the material being cut to reduce

saw vibration, blade jumping and blade

breakage.

17. Before cutting, check the cutting line is free

of nails, screws, etc.

18. If possible, ensure the work-piece is ﬁrmly

clamped to prevent movement.

19. Never stop the cutting blade by applying

side pressure to the blade.

20. Your Jigsaw is a hand held tools, do not

clamp your Jigsaw.

WARNING: Some dust particles

created by power sawing, contain

chemicals known to cause cancer, birth

defects or other reproductive harm.

Some examples of these chemicals are:

• Leadfromlead-basedpaints.

• Crystallinesilicafrombricksandcement

and other masonry products.

• Arsenicandchromiumfromchemically

treated lumber.

Your risk from these exposures varies,

depending upon how often you do this

type of work. To reduce your exposure to

these chemicals:

• Workinawell-ventilatedarea.

• Workwithapprovedsafetyequipment,

such as those dust masks that are specially

designed to ﬁlter microscopic particles.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX461 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info