Bedienungsanleitung Worx WX529.9 (Seite 7 von 96) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

673203

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Lithium-Ion cordless circular saw

This tool may cause hand-arm vibration

syndrome if its use is not adequately

managed.

WARNING: To be accurate, an estimation of

exposure level in the actual conditions of use

should also take account of all parts of the operating

cycle such as the times when the tool is switched off

and when it is running idle but not actually doing

the job. This may signiﬁcantly reduce the exposure

level over the total working period.

Helping to minimise your vibration exposure risk.

Maintain this tool in accordance with these

instructions and keep well lubricated (where

appropriate)

If the tool is to be used regularly then invest in anti

vibration accessories.

Avoid using tools in temperatures of 10

C or less

Plan your work schedule to spread any high

vibration tool use across a number of days.

ACCESSORIES

WX529 WX529.9

TCT 24T Blade 1 1

Dust adapter 1 1

Hex Key 1 1

20V 2.0 Ah Li-ion battery

(WA3551.1)

1 /

1hr charger(WA3860)

1 /

We recommend that you purchase your accessories

from the same store that sold you the tool. Refer to

the accessory packaging for further details. Store

personnel can assist you and offer advice.

SAFETY WARNINGS FOR

ALL SAWS

a) DANGER: Keep hands away from

cutting area and the blade. If both hands

are holding the saw, they cannot be cut by the

blade.

b) Do not reach underneath the workpiece. The

guard cannot protect you from the blade below

the workpiece.

c) Adjust the cutting depth to the thickness

of the workpiece. Less than a full tooth of

the blade teeth should be visible below the

workpiece.

d) Never hold piece being cut in your hands

or across your leg. Secure the workpiece to

a stable platform. It is important to support the

work properly to minimize body exposure, blade

binding, or loss of control.

e) Hold the power tool by insulated gripping

surfaces only, when performing an

operation where the cutting tool may

contact hidden wiring or its own cord.

Contact with a "live" wire will also make exposed

metal parts of the power tool "live" and could give

the operator an electric shock.

f) When ripping always use a rip fence or

straight edge guide. This improves the accuracy

of cut and reduces the chance of blade binding.

g) Always use blades with correct size and

shape (diamond versus round) of arbour

holes. Blades that do not match the mounting

hardware of the saw will run eccentrically,

causing loss of control.

h) Never use damaged or incorrect blade

washers or bolt. The blade washers and

bolt were specially designed for your saw, for

optimum performance and safety of operation.

FURTHER SAFETY

INSTRUCTIONS FOR ALL

SAWS

KICKBACK CAUSES AND RELATED WARNINGS

- Kickback is a sudden reaction to a pinched, bound

or misaligned saw blade, causing an uncontrolled

saw to lift up and out of the workpiece toward the

operator.

- When the blade is pinched or bound tightly by the

kerf closing down, the blade stalls and the motor

reaction drives the unit rapidly back toward the

operator.

- If the blade becomes twisted or misaligned in the

cut, the teeth at the back edge of the blade can dig

into the top surface of the wood causing the blade

to climb out of the kerf and jump back toward the

operator.

Kickback is the result of saw misuse and/or incorrect

operating procedures or conditions and can be

avoided by taking proper precautions as given below.

a) Maintain a ﬁrm grip on the saw and position

your arms to resist kickback forces.

Position your body to either side of the

blade, but not in line with the blade. Kickback

could cause the saw to jump backwards, but

kickback forces can be controlled by the operator,

if proper precautions are taken.

b) When blade is binding, or when interrupting

a cut for any reason, release the trigger and

hold the saw motionless in the material until

the blade comes to a complete stop. Never

attempt to remove the saw from the work

or pull the saw backward while the blade is

in motion or kickback may occur. Investigate

and take corrective actions to eliminate the cause

of blade binding.

c) When restarting a saw in the workpiece,

center the saw blade in the kerf and check

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX529.9 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info