Bedienungsanleitung Worx WX673 (Seite 11 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

575128

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

High frequency multi-function tool EN

of injury from the sharp edges of the

application tools. Application tools can

become very hot while working, presenting

danger of burns!

WARNING: To reduce the risk of

injury, do not let the Universal end

cut blades or any segment saw blades

face back toward the user’s hand.

Unscrew the fastening piece (8).

Clean the tool holder, the application tool and

the fastening piece (8).

Place the application tool exactly onto

the hex-shaped tool holder. Note that the

application tool has a ﬂush ﬁt.

Reposition the fastening piece (8) using the

supplied allen key.

2. ADAPTER (21) (See Fig.

)

Accessories of other brands (Fein

, Bosch

)

can be ﬁtted onto the Sonicrafter

brand tool

using the adapter.

NOTE: Fein is a registered trademark of

C. & E. Fein GmbH. Bosch is a registered

trademark of Robert Bosch GmbH.

1) Use the allen key (23) to unscrew the

fastening piece (8) and then remove it

from the tool holder.

2) Clean the tool holder, the adapter the

application tool and the fastening piece.

3) Fit the adapter onto the tool holder,

then place the application tool onto the

adapter. Make sure that the tool holder,

the adaptor, and the application tool share

a ﬂush ﬁt.

Reposition the fastening piece onto the

application tool and tighten with the allen key.

NOTE: Make sure the adapter matches the

application tool. The adapter (I) is matched to

the application tool of Fein

. The adapter (II)

is matched to the application tool of Bosch

(See Fig. B3)

3. MOUNTING/CHANGING THE

SANDING SHEET (See Fig. C)

Align the sanding sheet and press it onto the

sanding pad by hand.

Firmly press the power tool with the sanding

sheet against a ﬂat surface and brieﬂy switch

the power tool on. This provides for good

adhesion and prevents premature wear.

If one point has become worn, pull off the

sanding sheet, turn it 120° and place it on

again.

4. OPERATING THE ON/OFF SWITCH

To start the machine, push the On/Off switch

(2) forward so that the “I” is indicated on the

switch.

To switch off the machine, push the On/Off

switch (2) toward the rear so that the “0” is

indicated on the switch.

5. USING THE VARIABLE SPEED

CONTROL

Select oscillation frequency (speed) while

the motor is running.

The variable speed control (5) can be used

to set the optimum oscillating frequency

according to the accessories used and the

respective application.

High oscillation frequency:

Sanding, sawing, rasping and polishing

stone and metal.

Low oscillation frequency:

Polishing varnishes.

6. MOUNTING THE SUCTION DEVICE

(See Fig. D1, D2)

When vacuuming, mount the suction device

as shown in D1-D2.

NOTE: Using the sanding pad perforated.

You can only do the vacuuming after ﬁtting

the dust collector.

7. SANDING

Typical application: Wood, metal; small

areas, especially corners, edges and places

difﬁcult to access.

Select high oscillation frequency.

Sand with a constant movement and light

pressure.

Heavy pressure does not increase the removal

– the sanding sheet merely wears faster.

8. SAWING WITH THE SEGMENT SAW

BLADE

Typical application: Wood, plastics, sheet metal.

Select high oscillation frequency.

The saw blade lasts longer if the wear

is distributed evenly. To ensure an even

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX673 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info