Bedienungsanleitung Worx WX722 (Seite 14 von 120) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

575100

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Angle grinder EN

adapted to the material being cut.

Do not reduce the speed of running down

cutting discs by applying sideward pressure.

The direction in which the cutting is

performed is important.

The machine must always work in an up-

grinding motion. Therefore, never move the

machine in the other direction! Otherwise,

the danger exists of it being pushed

uncontrolled out of the cut.

WORKING HINTS FOR YOUR

ANGLE GRINDER

1. Always start at no load to achieve

maximum speed then start working.

2. Do not force the disc to work faster,

reducing the Disc’s moving speed means

longer working time.

3. Always work with a 15-30 angle between

disc and workpiece. Larger angles will

cut ridges into the workpiece and affect

the surface ﬁnish. Move the angle grinder

across and back and forth over the

workpiece.

4. When using a cutting disc never change the

cutting angle otherwise you will stall the

disc and angle grinder motor or break the

disc. When cutting, only cut in the opposite

direction to the disc rotation. If you cut in

the same direction as the disc rotation the

disc may push itself out of the cut slot.

5. When cutting very hard material best

results can be achieved with a diamond

disc.

6. When using a diamond disc it will become

very hot. If this happens you will see a full

ring of sparks around the rotating disc.

Stop cutting and allow to cool at no load

speed for 2-3 minutes.

7. Always ensure the workpiece is ﬁrmly held

or clamped to prevent movement.

MAINTENANCE

Remove the plug from the socket

before carrying out any adjustment,

servicing or maintenance.

There are no user serviceable parts in your

power tool. Never use water or chemical

cleaners to clean your power tool. Wipe clean

with a dry cloth. Always store your power

tool in a dry place. Keep the motor ventilation

slots clean. Keep all working controls free

of dust. Occasionally you may see sparks

through the ventilation slots. This is normal

and will not damage your power tool.

If the supply cord is damaged, it must be

replaced by the manufacturer, its service

agent or similarly qualiﬁed persons in order

to avoid a hazard.

TROUBLESHOOTING

Although your new angle grinder is really

very simple to operate, if you do experience

problems, please check the following:

1. If your grinder will not operate check the

power at the main plug.

2. If your grinder wheel wobbles or vibrates,

check that outer ﬂange is tight, check

that the wheel is correctly located on the

ﬂange plate.

3. If there is any evidence that the wheel

is damaged do not use as the damaged

wheel may disintegrate, remove it and

replace with a new wheel. Dispose of old

wheels sensibly.

4. If working on aluminum or a similar soft

alloy, the wheel will soon become clogged

and will not grind effectively.

ENVIRONMENTAL

PROTECTION

This product has been marked with a

symbol relating to removing electric

and electronic waste. This means that

this product shall not be discarded with

household waste but that it shall be returned

to a collection system which conforms to the

European Directive 2002/96/CE. It will then

be recycled or dismantled in order to reduce

the impact on the environment. Electric and

electronic equipment can be hazardous for

the environment and for human health since

they contain hazardous substances.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX722 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info