Bedienungsanleitung Worx WX800 (Seite 6 von 100) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

673104

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENLithium-Ion cordless angle grinder

1. AUXILIARY HANDLE

2. SPINDLE LOCK BUTTON

3. ON / OFF SWITCH

4. BATTERY PACK RELEASE BUTTON

5. BATTERY PACK*

6. WHEEL GUARD FOR GRINDING

7. DISC*

8. SPANNER

9. INNER FLANGE

10. OUTER FLANGE

11. CLAMP ADJUSTMENT NUT

12. SPINDLE

13. GUARD CLAMPING LEVER

14. WHEEL GUARD FOR CUTTING*

*Not all the accessories illustrated or

described are included in standard delivery.

TECHNICAL DATA

Type WX800 WX800.9 (800—819 -designation

of machinery, representative of Angle Grinder)

WX800 WX800.9

Charger voltage 100-240V ~ 50/60Hz /

Rated voltage

20V

Max**

No load speed 8600/min

Disc size 115mm

Disc bore 22mm

Spindle thread M14

Machine weight 1.8kg 1.54kg

**Voltage measured without workload. Initial

battery voltage reaches maximum of 20 volts.

Nominal voltage is 18 volts.

NOISE INFORMATION

A weighted sound pressure L

: 86.8dB(A)

A weighted sound power L

: 97.8dB(A)

3 dB(A)

Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined

according to EN 60745:

Surface

grinding or

abrasive

cutting off

Vibration emission value

h,AG

= 4,300m/s

Uncertainty K = 1.5m/s²

The declared vibration total value may be used for

comparing one tool with another, and may also be

used in a preliminary assessment of exposure.

WARNING: The vibration emission value

during actual use of the power tool can differ

from the declared value depending on the ways in

which the tool is used dependant on the following

examples and other variations on how the tool is

used:

How the tool is used and the materials being cut.

The tool being in good condition and well

maintained

The use the correct accessory for the tool and

ensuring it is sharp and in good condition.

The tightness of the grip on the handles and if any

anti vibration accessories are used.

And the tool is being used as intended by its design

and these instructions.

This tool may cause hand-arm vibration

syndrome if its use is not adequately managed.

WARNING! To be accurate, an estimation of

exposure level in the actual conditions of use

should also take account of all parts of the operating

cycle such as the times when the tool is switched off

and when it is running idle but not actually doing the

job. This may signiﬁcantly reduce the exposure level

over the total working period.

Help to minimize your vibration exposure risk.

ALWAYS use sharp chisels, drills and blades.

Maintain this tool in accordance with these

instructions and keep well lubricated (where

appropriate)

If the tool is to be used regularly then invest in anti

vibration accessories.

Avoid using tools in temperatures of 10

C or less

Plan your work schedule to spread any high vibration

tool use across a number of days.

ACCESSORIES

WX800

WX800.9

Metal grinding disc 1 1

Wheel guard for grinding

1 1

Spanner 1 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX800 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Worx WX800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info