Bedienungsanleitung WowWee 8006 Robosapien X (Seite 17 von 20) (Englisch)

584851

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

P.16

Troubleshooting Guide

If you are experiencing difculties with Robosapien X™, use this troubleshooting guide.

Problem

1. Robosapien X™

is not responding to

the Controller.

2. Robosapien X™

has trouble walking.

3. Robosapien X™

does not detect

sounds in Listen Mode.

4. Robosapien X™

’s

limbs are not moving

the way I want.

5. Robosapien X™

is behaving erratically.

Solution

a. Stand robot upright, clear all obstacles from the feet and hand sensors, then

push Robosapien™

’s ON/OFF button until you hear the yawning power up

sequence.

b. For best results keep a clear line of sight between the remote and the infra-red

receiver in the Robosapien™

’s head. Always point the controller directly at the

head and stay within 12 feet (3 meters) distance.

c. Check that batteries are inserted correctly and that nothing comes between

the batteries and battery contacts.

d. Robosapien X™ might be in PROGRAM MODE (“Beep, beep, beep”). Press

the PROGRAM PLAY button at the very bottom of the remote, then STOP to

restore regular operation.

e. Certain types of electronic lighting or bright sunlight can jam infra-red signals

from reaching your robot. Lower the robot’s sun visor or, if the problem persists,

move the robot into shadow or away from the interference.

f. The robot will ignore remote control signals during his wakeup routine. Wait

until the wakeup routine nishes, then he will respond as normal.

The hand or feet sensors detect objects in front or back. Use the BULLDOZER walking

mode (press SELECT twice, then BULLDOZER) or SELECT-STEP or SELECT-BACKSTEP

to move the robot away from the obstruction.

b. Robosapien X™ may have difculty walking on thick carpets or slippery

surfaces. For best results only use your Robosapien X™ on at, level surfaces

(low pile carpets or hard oors).

c. Something is stuck on the robot’s feet. Check that nothing is caught or

preventing his footpads, legs, or hands from moving freely.

d. Press < > again (or press < > twice if stopped) to enter SLOW

WALK mode, which is much more stable.

a. Wait two seconds after LISTEN MODE activates before making sounds or

tapping the robot’s body.

b. Robosapien™ does not hear sounds that are soft or low-pitched.

Make a sharp sound (eg. clapping your hands), or tap Robosapien™

’s body.

a. Robosapien™

’s arms and legs move to multiple positions. When a limb is

fully extended, use several button presses to nd new positions.

b. Reset the Robosapien X™ to the default position. Press SELECT then the

RESET (STOP) button.

a. Press the STOP button twice, or turn Robosapien X™ off and back on again.

b. Batteries are very low. Replace all batteries in the feet with fresh “D” batteries.

c. Something is interfering with the infra-red signals. Move the Controller closer

to the robot, or move the robot to another location under different lighting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

WowWee 8006 Robosapien X Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von WowWee 8006 Robosapien X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info