Bedienungsanleitung Xavax 00111932 - MAX Starter Kit (Seite 17 von 42) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

608044

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

3. Eco Switch Pushbutton

3.1. Intended use

The MAX! Eco Switch has a special job to do in the MAX! System. When you leave your house or apartment, all rooms

can be switched to manual mode and reduction temperature at the touch of a button. Similarly, when you return home, all

MAX! Components can be set to automatic operation at the touch of a button, thereby starting the separate weekly hea-

ting programs congured for each room. Communication between MAX! Components is bi-directional. This ensures that

the information sent reaches the recipient.

The MAX! Eco Switch is battery-operated. As such it is highly  exible where mounting and selecting a mounting location

are concerned. The MAX! Eco Switch is mounted and removed very easily using screws or adhesive strips. It is compa-

tible with a number of different surfaces including furniture, brick walls, tiles or glass. Holes or slits do not have to be chi-

selled out of brick walls. The frame supplied with the device can be used for wall mounting. It is also possible to integrate

the MAX! Eco Switch into existing switches, even if a  ush-mounting box is not already present. (See Section 10 for more

detailed information.) The device may only be operated indoors and must be protected from the effects of damp and dust,

as well as solar or heat radiation.

Using this device for any purpose other than that described in this operating manual does not fall within the scope of in-

tended use and shall invalidate any warranty or liability. This also applies to any conversion or modication work. This de-

vice is intended for private use only.

3.2. Overview

(A) Mounting plate

(B) Attachment frame

3.3. Inserting (replacing) batteries

• Once mounted, the pushbutton can easily be pulled out of the frame. To remove the pushbutton from the

frame, take hold of the sides of the pushbutton rocker and pull the pushbutton out. You do not need to re-

move the rocker or open the device.

• Turn the pushbutton over.

• After removing the old batteries , please wait approximately 60 seconds before inserting the new ones.

• Insert 2 LR03 (micro/AAA) batteries in the battery compartments (making sure that you insert them the

right way round).

• Put the pushbutton back into the frame.

3.4. Teaching-in on MAX! Components

In order to enable communication between MAX! Components, the devices have to be taught-in to one another.

• Start by switching the teach-in partner (e.g. the MAX! Cube) toteach-in mode.

• To activate teach-in mode, press and hold down one of the buttons on the MAX! Eco Switch for at

least 3 seconds. The LED  ashes in teach-in mode.

• Successful teaching-in of the MAX! Eco Switch is conrmed by the LED lighting up once. If you do

not teach-in any devices, the teach-in procedure deactivates automatically after 30 s.

The MAX! Eco Switch communicates with the MAX! Components only centrally via the MAX! Cube. If this central

interface fails, MAX! Components can no longer receive commands from the MAX! Eco Switch.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xavax 00111932 - MAX Starter Kit Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info