Bedienungsanleitung Xavax 111850 Radiator Thermostat (Seite 15 von 35) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

608010

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

28 29

• Once the function is active, “LOC” will appear on the display.

• To deactivate the function, press both buttons again.

9. Setting the heating break

If the heating is being switched off for the summer, you

can save battery power. This involves opening the valve

up fully. Limescale protection measures remain in place.

• To activate the heating break, turn the setting wheel

clockwise during manual operation (Manu) until “ON”

appears on the display.

• To terminate the heating break, quit manual operation

(Manu) or turn the setting wheel anticlockwise.

10. Setting frost protection mode

If you do not want the room to be heated, the valve can

be closed. It will only be opened again if there is a risk of

freezing due to frost. Limescale protection measures re-

main in place.

• To activate frost protection mode, turn the setting wheel

anticlockwise during manual operation (Manu) until

“OFF” appears on the display.

• To terminate frost protection mode, quit manual opera-

tion (Manu) or turn the setting wheel clockwise.

11. “Window open” function

In the event of a signicant drop in temperature, the actu-

ator can automatically detect whether the room is being

ventilated. To save on heating costs, the temperature

is then automatically reduced for a specic time period

(factory setting: 15 minutes). While this function is active,

the “window open” symbol (

) appears on the display.

• Press and hold down the menu button for more than

3 seconds.

• Use the setting wheel to select the “AER” menu item.

• Conrm with OK.

• Use the setting wheel to set the temperature and time.

To deactivate the function, select a time of “0”.

12. Setting the offset temperature

The temperature is measured at the heating appliance it-

self, with the result that other parts of the room may be

warmer or colder than this. To allow for this, you can set

a temperature offset of ±3.5°C. If, for example, a temper-

ature of 18°C is measured somewhere within the room

instead of the 20°C set, it means that an offset of -2.0°C

needs to be congured.

• Press and hold down the menu button for more than

3 seconds.

• Use the setting wheel to select the “TOF” menu item.

• Conrm with OK.

• Use the setting wheel to modify the temperature.

• Press the OK button to conrm.

13. Restoring the factory settings

You can reset the actuator to its initial state manually. This

will clear all the settings that have been made manually.

• Press and hold down the menu button for more than

3 seconds.

• Use the setting wheel to select the “RES” menu item.

• Conrm with OK.

• “CFM” will appear on the display; press OK to conrm.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xavax 111850 Radiator Thermostat Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info