Bedienungsanleitung Xavax 111971 (Seite 15 von 76) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

607640

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Offset

If the temperature in an area of the room differs from

the set temperature, you can perform a temperature

offset. Press

. Select the menu item

using the setting wheel. Conrm with

The degree setting ashes on the display.

Now set the desired temperature offset (from -5 to

+5 °C) using the setting wheel. Press

. The

temperature shown on the display does not change.

Window function

If you open a window, causing the temperature to

drop rapidly, the Wireless Radiator Controller/ Timer

automatically closes the heating valve to save energy.

appears on the display. The Wireless Radiator

Controller/ Timer resumes normal operation

afterwards. To set up this function, select .

Conrm with

. First select the sensitivity using

the setting wheel ( = high sensitivity, > =

moderate sensitivity (default setting) > = low

sensitivity). Conrm with

Now select the time (10 min (factory setting) - 60

min) for which the valve should remain closed.

Conrm with

Holiday function

You can specify a set temperature for the time

you are away. The schedule you have set resumes

after the holiday period. Press

. Select the

menu item using the setting wheel. Conrm

with

. (The case symbol appears on the

display.) Use the setting wheel to set the end time for

the holiday function = date for regular heating times

to resume). Conrm with

. Then enter the time

and conrm with

. ashes on the display.

Now set the temperature and conrm with

appears on the display. You can deactivate the

function with

Child protection

You can lock the Wireless Radiator Controller/ Timer

to prevent unauthorised operation. To do so, press

and hold

+ simultaneously for approx.

2 sec. until the symbol ashes on the display.

Holding this combination again causes the symbol to

disappear and removes the lock.

Pause heating/close valve

Press

. Select the menu item using the

setting wheel. Conrm with

. Use the setting

wheel to set the temperature on the display to

. The valve is now closed and operates without

a schedule. The once-weekly limescale prevention

function remains active. After the pause in heating,

switch to AUTO mode in the menu to resume the

schedule you have set.

All reset

Press

. Select the menu item using the

setting wheel. Conrm with

. ashes;

conrm with

.The Wireless Radiator

Controller/ Timer is now in back to the state in which

it was delivered. Proceed as though you were starting

up the device for the rst time.

The frost protection and limescale prevention

functions are automatically active:

Frost protection function

If the temperature falls below 6 °C, the Wireless

Radiator Controller/Timer opens the valve until the

temperature climbs above 8 °C. This prevents the

radiator from freezing.

Limescale prevention function

To prevent limescale from forming in the radiator

valves, the Wireless Radiator Controller / Timer

performs a limescale prevention run once per week

(Friday morning).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xavax 111971 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info