Bedienungsanleitung Xerox DocuMate 3115 (Seite 124 von 152) (Englisch)

484146

124

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

DocuMate 3115

User’s Guide

111

Troubleshooting

In addition to the troubleshooting information contained in this section, please see the Readme file on

your installation disc. The Readme file contains additional information that may help you diagnose

problems with the scanner.

If you try the troubleshooting procedures described in this section and in the Readme file, and the

scanner still has problems, visit our web site at www.xeroxscanners.com for additional technical

information.

Problem: The scanner won’t scan. What’s wrong?

Check for one of these possible causes:

• Are the cables loose or not plugged in securely? Inspect the cable connections. Make sure the

cables are plugged in securely.

• Is the scanner’s status light on? Turn on the scanner’s power. If the status light doesn’t come on,

plug the power supply into another electrical outlet.

• Did you restart the computer after installing the software? If you didn’t restart the computer, it

may not have loaded all of the software files. Try restarting your computer.

• Did you plug the scanner into a USB hub? If you’re using a USB hub to connect the scanner, the

hub must have its own power supply. If the hub does not have its own power supply, plug the

scanner into a USB port on the computer.

• Did you select another TWAIN source for acquiring images? If you use multiple TWAIN devices

with your computer, you may have selected another source for images. Start the PaperPort

software and click the Scan icon, then make sure DocuMate 3115 is selected as the scanner.

Problem: The installation will not complete successfully. If installation finishes, the scanner’s

One Touch 4.0 options do not seem to work properly.

A likely cause is that some driver programs are already installed on your computer for another scanner.

Or you previously had another Visioneer scanner and that driver program is still on your computer.

They are interfering with the installation and One Touch options, and you need to remove those other

drivers and re-install your DocuMate 3115 scanner. Please see the documentation that you received

with the other scanner for the steps to remove its driver programs.

Problem: My computer keeps giving me out of hard drive space error messages.

The minimum requirement of 350MB free hard drive space is for the installation of the software and

basic, low resolution, scanning. High resolution scans result in files that can be over 1 gigabyte in size.

Free up some space on your hard drive for the software to be able to save the scanned images.

Problem: With AutoCrop to Original selected, sometimes I get blank pages, or pages with lines.

The pages were probably scanned in crooked, or skewed. To use AutoCrop to Original, the pages must

be scanned in straight. Adjust the paper guides on the scanner so pages feed in straight.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xerox DocuMate 3115 Seite 124

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Xerox DocuMate 3115

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info