Bedienungsanleitung Xerox DocuMate 3640 (Seite 107 von 132) (Englisch)

484150

107

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Maintenance

DocuMate 3640

User’s Guide

If the scanner does not reconnect:

1. Turn off the scanner

2. Unplug the power cable from the scanner.

3. Restart your computer.

4. After the restart is complete, plug the power cable back in, and turn the scanner back on.

Problem: The paper jams the ADF. How can I keep the paper from jamming so often?

To reduce the number of paper jams, smooth and straighten the paper before scanning, and adjust the

guides to the paper width. Paper fed into the ADF at an angle can cause the feed mechanism to jam. If

paper jams are occurring more frequently, try cleaning the roller and ADF pad with a soft cloth

dampened with Isopropyl rubbing alcohol. Excessive dust on the roller can make it appear worn and

will cause issues feeding paper. See “Cleaning the Scanner” on page 84 for cleaning instructions.

Problem: The ADF won’t feed pages properly. How can I fix it?

A dirty or worn ADF pad assembly or dirt on the roller can cause documents to feed in skewed at an

angle, or multiple pages to feed at the same time. Try cleaning the roller first. See “Cleaning the

Scanner” on page 84. If that doesn’t solve the problem, the pad assembly may need to be replaced. It

is user-replaceable. See Xerox DocuMate 3640 Scanner Parts List on page 98 for the ordering number.

See Replacing the ADF Pad Assembly on page 87 for the steps to replace the pad.

Problem: The paper jams about halfway through the scan. How can I keep this from happening?

Check the flatbed glass to make sure no items are on it when you scan from the ADF. Multiple items

placed on the flatbed glass will raise the lid slightly, thus preventing the pages feeding through the

ADF from touching the glass. When that occurs, the pages are unable to feed back out of the ADF and

the pages can jam.

Problem: The motor runs but doesn't feed the paper. How can I fix it?

Make sure the paper is securely seated in the ADF so the paper rests on the rollers. The paper sensor

that initiates the rollers to grab the paper may be engaged, but the paper may not be fully in the ADF

tray so the rollers cannot grab a page to feed it through.

Problem: The scans from the ADF are always crooked. What do I need to do to get the scans

straight?

Make sure to align the paper guides to the edges of the paper. If you are scanning small items that are

smaller than the paper guides’ minimum adjustment, scan these items on the flatbed glass instead.

Problem: The scanner is reporting Double-Feed errors but there is only one page in the ADF. What

is the problem?

If there is excessive paper dust or dirt on the Double-Feed sensor, the scanner will report false Double-

Feed errors. Make sure you clean the Double-Feed sensor, when cleaning the ADF, as described

previously in this section. The Double-Feed sensor is located in the body of the ADF, the receiving

sensor is underneath the ADF door, opposite of the Double-Feed sensor.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xerox DocuMate 3640 Seite 107

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Xerox DocuMate 3640

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info