Bedienungsanleitung Xerox WorkCentre 3119 (Seite 76 von 86) (Englisch)

610746

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

Using Your Printer in Linux

MFP Ports Configuration

In this window, you can view the list of available MFP ports,

check the status of each port and release a port that is stalled

in busy state when its owner is terminated for any reason.

•

Refresh

: Renews the available ports list.

•

Release port :

Releases the selected port.

Sharing Ports Between Printers and Scanners

Your machine may be connected to a host computer via the

parallel port or USB port. Since the MFP device contains more

than one device (printer and scanner), it is necessary to

organize proper access of “consumer” applications to these

devices via the single I/O port.

The Xerox MFP driver package provides an appropriate port

sharing mechanism that is used by Xerox printer and scanner

drivers. The drivers address their devices via so-called MFP

ports. The current status of any MFP port can be viewed via the

MFP Ports Configuration. The port sharing prevents you from

accessing one functional block of the MFP device, while another

block is in use.

When you install a new MFP printer onto your system, it is

strongly recommended you do this with the assistance of an

MFP Configurator. In this case you will be asked to choose I/O

port for the new device. This choice will provide the most

suitable configuration for MFP’s functionality. For MFP scanners

I/O ports are being chosen by scanner drivers automatically, so

proper settings are applied by default.

Switches to

MPF ports

configuration.

Shows the port type,

device connected to

the port and status

Shows all of the

available ports.

Configuring Printer Properties

Using the properties window provided by the Printers

configuration, you can change the various properties for your

machine as a printer.

Open the MFP Configurator.

If necessary, switch to Printers configuration.

Select your machine on the available printers list and click

Properties

The Printer Properties window opens.

The following five tabs display at the top of the window:

•

General

: allows you to change the printer location and

name. The name entered in this tab displays on the

printer list in Printers configuration.

•

Connection

: allows you to view or select another port. If

you change the printer port from USB to parallel or vice

versa while in use, you must re-configure the printer port

in this tab.

•

Driver

: allows you to view or select another printer

driver. By clicking

Options

, you can set the default

device options.

•

Jobs

: shows the list of print jobs. Click

Cancel job

cancel the selected job and select the

Show completed

jobs

check box to see previous jobs on the job list.

•

Classes

: shows the class that your printer is in. Click

Add to Class

to add your printer to a specific class or

click

Remove from Class

to remove the printer from the

selected class.

Click

to apply the changes and close the Printer

Properties Window.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xerox WorkCentre 3119 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Xerox WorkCentre 3119

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info