Bedienungsanleitung Xerox WorkCentre 3210 (Seite 53 von 140) (Englisch)

610742

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

52 _Faxing

8. To enter more fax numbers, press OK when Yes appears and repeat

steps 6 and 7. You can add up to 10 destinations.

9. When you have finished entering fax numbers, press the left/right arrow

to select No at the Another No.? prompt and press OK.

10.Enter the job name you want and press OK.

For details on how to enter alphanumeric characters, see page 30.

If you do not want to assign a name, skip this step.

11.Enter the time using the number keypad and press OK, or Start .

The original is scanned into memory before transmission. The display

shows memory capacity and the number of pages being stored in

memory.

12.If an original is placed on the scanner glass, select Yes to add another

page. Load another original and press OK.

When you have finished, select No at the Another Page? prompt.

The machine returns to ready mode. The display reminds you that you

are in ready mode and that a delayed fax is set.

Adding pages to a delayed fax

You can add pages to the delayed transmissions previously reserved in

your machine’s memory.

1. Load the originals to be added and adjust document settings.

2. Press Menu until Fax Feature appears on the bottom line of the

display and press OK.

3. Press OK when Add Page appears.

4. Press the left/right arrow until the fax job you want appears and

press OK.

The machine scans the original into memory and shows the total

number of pages and the number of the added pages.

Canceling a delayed fax

1. Press Menu until Fax Feature appears on the bottom line of the

display and press OK.

2. Press the left/right arrow until Cancel Job appears and press OK.

3. Press the left/right arrow until the fax job you want appears and

press OK.

4. Press OK when Yes appears.

The selected fax is deleted from memory.

Sending a priority fax

Using the Priority Fax feature, a high priority fax can be sent ahead of

reserved operations. The original is scanned into memory and immediately

transmitted when the current operation is finished. In addition, priority

transmission will interrupt a Multiple Send operation between stations (i.e.,

when the transmission to station A ends, before transmission to station B

begins) or between redial attempts.

1. Press Fax .

2. Load originals face up into the ADF, or place a single original face down

on the scanner glass.

For details about loading an original, see page 32.

3. Adjust the document resolution and darkness to suit your fax needs. See

page 48.

4. Press Menu until Fax Feature appears on the bottom line of the

display and press OK.

5. Press the left/right arrow until Priority Send appears and press OK.

6. Enter the number of the receiving machine.

You can use speed buttons, speed dial numbers, or group dial numbers.

For details, see page 56.

7. Press OK to confirm the number.

8. Enter the job name you want and press OK.

The original is scanned into memory before transmission. The display

shows memory capacity and the number of pages being stored in

memory.

9. If an original is placed on the scanner glass, select Yes to add another

page. Load another original and press OK.

When you have finished, select No at the Another Page? prompt.

The machine shows the number being dialed and begins sending the

fax.

Forwarding faxes

You can forward your incoming and outgoing faxes to another fax machine

or email address.

Forwarding sent faxes to another fax machine

You can set the machine to send copies of all outgoing faxes to a

specified destination, in addition to the fax numbers you entered.

1. Press Fax .

2. Press Menu until Fax Feature appears on the bottom line of the

display and press OK.

3. Press the left/right arrow until Forward appears and press OK.

4. Press OK when Fax appears.

5. Press the left/right arrow until Send Forward appears and press OK.

6. Press the left/right arrow to select On and press OK.

7. Enter the number of the fax machine to which faxes are to be sent

and press OK.

8. Press Stop/Clear to return to ready mode.

Subsequent sent faxes will be forwarded to the specified fax

machine.

Forwarding sent faxes to email address

You can set the machine to send copies of all outgoing faxes to a

specified destination, in addition to the email address you entered.

1. Press Fax .

2. Press Menu until Fax Feature appears on the bottom line of the

display and press OK.

3. Press the left/right arrow until Forward appears and press OK.

4. Press the left/right arrow until E-mail appears and press OK.

5. Press the left/right arrow until Send Forward appears and press OK.

6. Press the left/right arrow to select On and press OK.

7. Enter your email address and press OK.

8. Enter the email address to which faxes are to be sent and press OK.

9. Press Stop/Clear to return to ready mode.

Subsequent sent faxes will be forwarded to the specified email

address.

Once you entered a group dial number, you cannot enter another

group dial numbers anymore.

If you set a time earlier than the current time, the fax will be sent at

that time on the following day.

SMTP server must be setup to forward to an email address, see

"Setting up an e-mail account" on page 44. (WorkCentre 3220

only)

Xerox WorkCentre 3210 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Xerox WorkCentre 3210

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info