Bedienungsanleitung Xerox WorkCentre 3550 (Seite 211 von 226) (Englisch)

610750

211

Zoom out

Zoom in

Vorherige Seite

1/226

Nächste Seite

Fax Regulations

Xerox WorkCentre 3550

User Guide

211

Fax Regulations

United States

Fax Send Header Requirements

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or

other electronic device, including a fax machine, to send any message unless such message clearly

contains in a margin at the top or bottom of each transmitted page or on the first page of the

transmission, the date and time it is sent and an identification of the business or other entity, or other

individual sending the message and the telephone number of the sending machine or such business,

other entity or individual. The telephone number provided may not be a 900 number or any other

number for which charges exceed local or long distance transmission charges. In order to program this

information into your machine, refer to Machine Settings on page 147 for instructions.

Data Coupler Information

This device complies with Part 68 of the FCC rules and the requirements adopted by the Administrative

Council for Terminal Attachments (ACTA). On the cover of this device is a label that contains, among

other information, a device identifier in the format US:AAAEQ##TXXXX. If requested, this number

must be provided to the Telephone Company. A plug and jack used to connect this device to the

premises wiring and telephone network must comply with the applicable FCC Part 68 rules and

requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this

device. It is designed to be connected to a compatible modular jack that is also compliant. See

installation instructions for details.

You may safely connect the machine to the following standard modular jack: USOC RJ-11C using the

compliant telephone line cord (with modular plugs) provided with the installation kit. See installation

instructions for details. To order the correct service from the local telephone company, you may also

have to quote the codes listed below:

• Facility Interface Code (FIC) = 02LS2

• Service Order Code (SOC) = 9.0Y

WARNING: Ask your local telephone company for the modular jack type installed on your line.

Connecting this machine to an unauthorized jack can damage telephone company equipment.

You assume all responsibility and/or liability for any damage caused by the connection of this

machine to an unauthorized jack.

The Ringer Equivalence Number (REN) is used to determine the number of devices that may be

connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing

in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0).

To be certain of the number of devices that may be connected to a line, as determined by the total

RENs, contact the local Telephone Company. The REN for this device is part of the device identifier that

has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point

(e.g., 03 is a REN of 0.3).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xerox WorkCentre 3550 Seite 211

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Xerox WorkCentre 3550

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info