Bedienungsanleitung Xerox WorkCentre 4150 (Seite 12 von 201) (Englisch)

610754

Zoom out

Zoom in

Vorherige Seite

1/201

Nächste Seite

1 Welcome

8 Xerox WorkCentre 4150 User Guide

• Do not allow anything to rest on the power cord. Do not locate the product

where persons will step or trip on the cord.

• Use of an extension cord with this product is not recommended or

authorized. Users should check building codes and insurance

requirements if a properly earthed extension cord is to be used. Ensure that

the total ampere ratings of the products plugged into the extension cord do

not exceed the extension cord ampere rating. Also, ensure that the total

amperage of all products plugged into the wall outlets does not exceed the

outlet rating.

• Disconnect Device for this product is the power cord. To remove all

electrical power to the product, disconnect the power cord from the power

receptacle.

• Your equipment is equipped with an energy saving device to conserve

power when the machine is not in use. The machine may be left on

continuously.

•Unplug this product from the wall outlet before cleaning. Always use

materials specifically designated for this product. Use of other materials

may result in poor performance and could create a hazardous situation.

• Do not use aerosol cleaners. Follow the instructions in this User Guide for

proper cleaning methods.

• Never use supplies or cleaning materials for purposes other than those for

which they were intended. Keep all supplies and materials out of reach of

children.

• Do not use this product near water, wet locations, or outdoors.

• Do not place this product on an unstable cart, stand or table. The product

may fall, causing personal injury or serious damage to the product.

• Slots and Openings in the cabinet and in the back and sides of the product

are provided for ventilation. To ensure reliable operation of the product and

to protect it from overheating, these openings must not be blocked or

covered. The product should never be located near or over a radiator or

heat register. This product should not be placed in a built-in installation

unless proper ventilation is provided.

• Never push objects of any kind into the slots of the product as they may

touch dangerous voltage points or short out parts which could result in a fire

or electric shock.

• Never spill liquid of any kind on the product.

• Never remove covers or guards that require a tool for removal, unless

directed to do so in a Xerox approved maintenance kit.

• Never defeat interlock switches. Machines are designed to restrict operator

access to unsafe areas. Covers, guards and interlock switches are

provided to ensure that the machine will not operate with covers opened.

• Do not put your hands into the fuser area, located just inside the exit tray

area, as you may be burned.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xerox WorkCentre 4150 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Xerox WorkCentre 4150

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info