Bedienungsanleitung Xerox WorkCentre 5020-DB (Seite 11 von 133) (Englisch)

610760

Zoom out

Zoom in

Vorherige Seite

1/133

Nächste Seite

Safety Notes

Xerox WorkCentre 5016/5020 User Guide 11

Operational Safety Information

To ensure the continued safe operation of your Xerox equipment, follow these safety

guidelines at all times.

Do These:

• Always connect equipment to a correctly grounded power outlet. If in doubt, have

the outlet checked by a qualified electrician.

• This equipment must be connected to a protective earth circuit.

This equipment is supplied with a plug that has a protective earth pin. This plug will

fit only into an earthed electrical outlet. This is a safety feature. To avoid risk of

electric shock, contact your electrician to replace the electrical outlet if you are

unable to insert the plug into it. Never use a plug that lacks an earth connection

terminal to connect the product to an electrical outlet.

• Always follow all warnings and instructions that are marked on or supplied with the

equipment.

• Always locate the equipment in an area that has adequate ventilation, and space for

servicing. See installation instructions for minimum dimensions.

• Always use materials and supplies specifically designed for your Xerox equipment.

Use of unsuitable materials may result in poor performance.

• Always unplug this equipment from the electrical outlet before cleaning.

Do Not Do These:

• Never use a plug that lacks an earth connection terminal to connect the product to

an electrical outlet.

• Never attempt any maintenance procedures that are not specifically described in the

customer documentation.

• This equipment should not be placed in a built-in unit unless proper ventilation is

provided. Please contact your authorized local dealer for further information.

• Never remove covers or guards that are fastened with screws. There are no

operator serviceable areas within these covers.

• Never locate the equipment near a radiator or any other heat source.

• Never push objects of any kind into the ventilation openings.

• Never override or “cheat” any of the electrical or mechanical interlock devices.

• Never operate the equipment if you notice unusual noises or odors. Disconnect the

power cord from the electrical outlet and contact your local Xerox Service

Representative or Service Provider immediately.

Maintenance Information

Do not attempt any maintenance procedures that are not specifically described in the

customer documentation supplied with your machine.

• Do not use aerosol cleaners. The use of cleaners that are not approved may cause

poor performance of the equipment, and could create a dangerous condition.

• Use supplies and cleaning materials only as directed in the customer

documentation. Keep all these materials out of the reach of children.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xerox WorkCentre 5020-DB Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Xerox WorkCentre 5020-DB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info