Bedienungsanleitung Xerox WorkCentre 5875 (Seite 699 von 702) (Englisch)

610818

699

Zoom out

Zoom in

Vorherige Seite

1/702

Nächste Seite

Safety and Regulations WorkCentre

5845/5855/5865/5875/5890

User Guide 697

Before installing this device, users must make sure that it is permissible to be connected to the

facilities of the local telecommunications company. The device must also be installed using an

acceptable method of connection. The customer should be aware that compliance with the above

conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative designated by the

supplier. Any repairs or alterations made by the user to this device, or device malfunctions, may give

the telecommunications company cause to request the user to disconnect the device.

Users should make sure for their own protection that the electrical ground connections of the power

utility, telephone lines and internal metallic water pipe systems, if present, are connected together.

This precaution may be particularly important in rural areas.

CAUTION: Users should not attempt to make such connections themselves, but should con-

tact the appropriate electric inspection authority, or electrician, as appropriate.

The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of

the maximum number of terminals allowed to be connected to a telephone interface. The

termination on an interface may consist of any combination of devices subject only to the

requirement that the sum of the Ringer Equivalent Numbers of all of the devices does not exceed

5. For the Canadian REN value, please see the label on the device.

Europe

Radio Equipment & Telecommunications Terminal Equipment Directive

The Facsimile has been approved in accordance with the Council Decision 1999/5/EC for pan-

European single terminal connection to the public switched telephone network (PSTN). However,

due to differences between the individual PSTNs provided in different countries, the approval does

not, of itself, give an unconditional assurance of successful operation on every PSTN network

terminal point.

In the event of a problem you should contact your authorized local dealer in the first instance.

This device has been tested to and is compliant with ES 203 021-1, -2, -3, a specification for terminal

equipment for use on analogue-switched telephone networks in the European Economic Area. This

device provides a user-adjustable setting of the country code. Refer to the customer documentation

for this procedure. Country codes should be set prior to connecting this device to the network.

Note: Although this device can use either loop disconnect (pulse) or DTMF (tone) signaling, it is

recommended that it is set to use DTMF signaling. DTMF signaling provides reliable and faster call

setup. Modification of this device, connection to external control software or to external control

apparatus not authorized by Xerox, will invalidate its certification.

South Africa

This modem must be used in conjunction with an approved surge protection device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xerox WorkCentre 5875 Seite 699

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Xerox WorkCentre 5875

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info