General Care and Troubleshooting WorkCentre
®
5845/5855/5865/5875/5890
User Guide 681
Loading Tray 2 and Changing the Tray Settings
Loading Tray 3
Loading Tray 4
Loading Tray 5 (Bypass Tray) and Changing the Tray Settings
Loading Tray 6
Paper curls
The finisher does not staple or hole punch correctly
• To correct stapling problems, ensure the maximum number of sheets is not exceeded for the
finisher and weight of paper being used.
• Check the correct option has been selected on the touch screen.
• Check the touch screen for a fault message indicating no staples. Replace the staple cartridge.
• When using large paper, remove any output contained in the Stacker Tray.
• Check that the hole punch waste container is not full. The hole punch waste container collects
waste from the hole punch.
• Check the correct paper size has been selected for the paper loaded in the tray.
• Check the paper tray guides are locked into position against the paper.
More Information
Loading Tray 1 and Changing the Tray Settings
Loading Tray 2 and Changing the Tray Settings
Loading Tray 3
Loading Tray 4
Loading Tray 5 (Bypass Tray) and Changing the Tray Settings
Loading Tray 6
Replacing the Staple Cartridge in the Basic Office Finisher
Replacing the Staple Cartridge Office Finisher
Replacing the Staple Cartridges in the High Volume Finisher and Booklet Maker
Replacing the Staple Cartridges in the Office Finisher with Booklet Maker
Replacing the Staple Cartridge in the Convenience Stapler
Emptying the Hole Punch Waste
Stray marks or black marks from hole punched originals are not removed
• Use the Edge Erase option to erase the edge with the punched holes.
• Copy from the document glass with the document feeder down.
More Information
Erasing Edges from Copies
Pages are out of sequence or upside down when the Booklet Creation feature
is used
• Ensure that the originals are in the correct sequence.
• Feed LEF originals to SEF orientated paper.
• Enable the display options for Booklet Creation and ensure that the correct sequence is
selected (i.e. Left to Right or Right to Left).
