Printing
WorkCentre 7755/7765/7775 Multifunction Printer
User Guide
54
Printing on Special Media
This section includes:
• Printing on Transparencies on page 54
• Printing on Envelopes on page 55
• Printing on Labels on page 55
• Printing on Glossy Paper on page 56
• Printing on Custom Size Paper on page 57
Printing on Transparencies
Transparencies can be printed from Tray 1, 2, 3, 4, and 5 (Bypass Tray). For best results, use only
recommended Xerox transparencies.
To order paper, transparencies, or other specialty media, contact your local reseller or go to
www.xerox.com/office/WC7755_WC7765_WC7775supplies.
Caution: Damage caused by using unsupported paper, transparencies, or other specialty media is
not covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee. The Total
Satisfaction Guarantee is available in the United States and Canada. Coverage may vary outside
these areas; please contact your local representative for details.
See also:
www.xerox.com/paper Recommended Media List (United States)
www.xerox.com/europaper Recommended Media List (Europe)
Guidelines
• Remove all paper before loading transparencies in the tray.
• Handle transparencies by the edges using both hands. Fingerprints or creases can cause poor
print quality.
• Do not load more than 20 transparencies. Overloading the tray can cause the printer to jam.
• Load transparencies faceup into Tray 5 (Bypass Tray) and facedown into trays 1, 2, 3 or 4.
• Do not use transparencies with stripes on the side.
• Do not fan transparencies.
• After loading transparencies, change the paper type to Transparency on the touch screen.
• In the printer driver, select either Transparency as the paper type, or select the tray loaded with
transparencies as the paper source.
