Bedienungsanleitung Xerox workcentre M118 (Seite 21 von 248) (Holländisch)

484119

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

Informatie betreffende Europese regelgeving

Xerox CopyCentre/WorkCentre 118 Handleiding voor de gebruiker 21

Voor FAX-functie

V.S.

FAX Send Header Requirements:

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to

use a computer or other electronic device, including a FAX machine, to send any

message unless such message clearly contains in a margin at the top or bottom of each

transmitted page or on the first page of the transmission, the date and time it is sent

and an identification of the business or other entity, or other individual sending the

message and the telephone number of the sending machine or such business, other

entity or individual. The telephone number provided may not be a 900 number or any

other number for which charges exceed local or long distance transmission charges.

In order to program this information into your machine, refer to customer

documentation and follow the steps provided.

Data Coupler Information:

This equipment complies with Part 68 of the FCC rules and the requirements adopted

by the Administrative Council for Terminal Attachments (ACTA). On the rear of this

equipment is a label that contains, among other information, a product identifier in the

format US:AAAEQ##TXXXX. If requested, this number must be provided to the

Telephone Company.

A plug and jack used to connect this equipment to the premises wiring and telephone

network must comply with the applicable FCC Part 68 rules and requirements adopted

by the ACTA. A compliant telephone cord and modular plug is provided with this

product. It is designed to be connected to a compatible modular jack that is also

compliant. See installation instructions for details.

You may safely connect the machine to the following standard modular jack: USOC

RJ-11C using the compliant telephone line cord (with modular plugs) provided with the

installation kit. See installation instructions for details.

The Ringer Equivalence Number (REN) is used to determine the number of devices

that may be connected to a telephone line. Excessive RENs on a telephone line may

result in the devices not ringing in response to an incoming call. In most but not all

areas, the sum of RENs should not exceed five (5.0). To be certain of the number of

devices that may be connected to a line, as determined by the total RENs, contact the

local Telephone Company. For products approved after July 23, 2001, the REN for this

product is part of the product identifier that has the format US:AAAEQ##TXXXX. The

digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).

For earlier products, the REN is separately shown on the label.

If this Xerox equipment causes harm to the telephone network, the Telephone

Company will notify you in advance that temporary discontinuance of service may be

required. But if advance notice is not practical, the Telephone Company will notify the

customer as soon as possible. Also, you will be advised of your right to file a complaint

with the FCC if you believe it is necessary.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xerox workcentre M118 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info