Connection to Bluetooth or using a TF card
Using of TF card
1. After turning on, Beva Magic Star Bluetooth Speaker
immediately detect a presence of TF card and be able to
play all of its contents.
2. If, before switching the device you insert TF card, rst
perform a Bluetooth connection.
3. By default, the device priority is to play les from TF
card. Even if at present time the device is connected to
other smart devices over Bluetooth, as soon as you insert a
TF card, Beva Magic Star Bluetooth Speaker, rst paused,
and then start to play contents of TF card.
4. During playback, content of TF card, you can easily
switch to Bluetooth connection mode, pressing the
«Function switch button».
USB stick
During playback les from TF card, connect the device
to your computerб using the USB cable. Beva Magic
Star Bluetooth Speaker, rst stop on a break, and then
switches to playback content from a USB stick. In this
mode, you can copy your favorite songs from your
computer to TF card.
Charging the device
Beva Magic Star Bluetooth Speaker is equipped with a
lithium-polymer battery of high capacity. A battery can be
repeatedly used. There are two methods of charging Beva
Magic Star Bluetooth Speaker: from a computer or power
adapter.
Charging from a computer via a USB cable:
Using a USB cable, connect Beva Magic Star Bluetooth
Speaker to your PC, and then the device starts charging.
Charging from the AC adapter:
Using a power cord, plug Beva Magic Star Bluetooth
Speaker to a power adapter, and then the device starts
charging.
* During charging, status indicator is lit in red. Once the
device fully charged, indicator turns o.
Statusd indicator
Fast blinking white light indicates that the device waits for
Bluetooth connection.
Slowly ashing LED white color indicates le playback with
TF card.
A steady white light indicates successful pairing with
Bluetooth devices or using Bluetooth le playback.
A steady red light indicates charging mode device.
If red light is turned o, Beva Magic Star Bluetooth Speaker
is fully charged.
FAQ
Problems with playback.
1. Make sure your smartphone is within Bluetooth range
(less than 10m). The signal will be weakened if there are any
obstacles between the devices.
2. Check charge level of Beva Magic Star Bluetooth
Speaker. If battery level is low, charge the device.
The device does not nd Beva Magic Star Bluetooth
Speaker. Problems with pairing devices.
1. Ensure that Bluetooth pairing Beva Magic Star Bluetooth
Speaker is on (fast white light is ashing).
2. Make sure that devices are within Bluetooth range (less
than 10m).
3. Make sure that your smartphone or other Smart Bluetooth
devices support A2HP protocol. Make sure you’re have
latest Bluetooth drivers version.
4. Make sure that Beva Magic Star Bluetooth Speaker is not
connected to a smartphone or other Smart Bluetooth device.
5. Make sure that Beva Magic Star Bluetooth Speaker is not
connected to a computer via USB cable, turn on USB ash
drive mode.
6. Re-enable and set Bluetooth pairing on your phone.
Unable to connect to Beva Magic Star Bluetooth
Speaker
1. A new device cannot connect to this device, if Beva
Magic Star Bluetooth Speaker is already connected to a
smartphone or other Smart Bluetooth device.
2. Turn o Bluetooth on your phone, then turn o current pair
of devices. Perform a new connection to Beva Magic Star
Bluetooth Speaker.
Main specications
Model: BABY-M1;
Dimensions: W134.5 x H84.5 x D45 mm;
Standard of Bluetooth V2.1 + EDR (A2DP);
Transmission Distance: <10m (Data transmission distance
depends on environment and on Bluetooth settings on your
phone);
Voltage of USB charging: DC 5V;
Output power: 1.5 W;
Battery: 3.7V/450 mAh Li-polymere;
Playback time: est. 6 hrs. (on volume 50%);
Weight: 101g.
Cautions
1. It is not recommended to use this device in areas
with high temperature, high humidity or near ammable
substances to avoid damage or short circuit.
2. Do not install this device near devices with strong
magnetic elds.
3. Do not dispose of the device in water or other liquids.
4. Do not dispose of the device in order to avoid
breakdowns.
5. Do not disassemble the device yourself to avoid
breakage.
6. Do not use chemical solvents to clean the device. When
cleaning the device must be turned o and not charged.
