Bedienungsanleitung Xiaomi Mi Electric Scooter 1S Pro 2 Lite (Seite 5 von 83) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

801237

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

06 07

5. Improper disposal of used baeries can seriously pollute the environment. Observe local regulations when disposing

of this baery pack. Do not discard this baery pack at will, to protect the natural environment.

6. Fully charge aer every use, in order to extend its baery life.

Do not place the baery in an environment where the ambient temperature is higher than 50°C or lower than -20°C (e.g.,

do not leave the scooter or the baery pack in a car under direct sunlight for an extended time). Do not throw the

baery pack into ﬁre as it may lead to baery failure, baery overheating, and even another ﬁre. If the scooter is

expected to be le idle for more than 30 days, please fully charge the baery and place it in a dry and cool place. Keep in

mind to recharge it every 60 days to protect the baery from potential damage which is beyond limited warranty.

The scooter shall be only be used with original baeries and charging of the Scooter shall only be done by the original

charging adapter supplied with the scooter (or any baery model or charging adapter model approved by the

manufacturer as compatible).

Always charge before exhausting the baery to prolong the baery's lifespan. The baery pack performs beer at

normal temperature, and poor when it is below 0°C. For instance, when it is below -20°C, the riding range is only half or

less at normal state. When the temperature rises, the riding range restores. For detailed information, please refer to Mi

Home / Xiaomi Home App.

The external ﬂexible cable of this transformer cannot be replaced; If the supply cord is damaged, it must be replaced by

a special cord or assembly available from the manufacturer or its service agent. Should you have questions, you can

contact Xiaomi's customer service available at www.mi.com.

Note: fully charged scooter will last for 120-180 days. The built-in intelligent chip will keep a log of its charging and

discharging records. The damage caused by prolonged no charge is irreversible and is beyond limited warranty. Once the

damage is done, the baery cannot be recharged (non-professionals are forbidden to dismantle the baery pack, as it

may cause electric shock, short circuit or even major safety accidents).

In case of accident, blockage or breakdown, do not try to repair by yourself and contact an authorized repairer if the

product is still under guarantee. If not, you can contact any specialized repairer of your choice. You can ask for the list of

the authorized repairers to the customer service available at www.mi.com. For any question, please contact Xiaomi's

customer service available at www.mi.com.

Eﬀorts have been made to simplify wording in the user material for users. When an action appears too complicated for a

user, he is advised to contact an authorized or a specialized repairer or Xiaomi's customer service.

WARNING! As with any mechanical component, a vehicle is subject to high stresses and wear.

The various materials and components may react diﬀerently to wear or fatigue. If the expected service life for a

component has been exceeded, it may break suddenly, therefore risking causing injuries to the user. Cracks, scratches

and discoloration in the areas subject to high stresses indicate that the component has exceeded its service life and

please contact an authorized or a specialized repaired or Xiaomi's customer service.

Adjust the handlebar

Long-term use of the scooter may result in loose screws, causing the handlebar stem to get unstable. If you notice the

handlebar stem gets shaky when riding, follow the steps below.

Tools:

I: 8-10 mm wrench

II: 4 mm Allen key

Note: These tools are to be prepared by the user.

Steps:

1. When in the folded state, use tool I to loosen "c" (clockwise).

2. Use tool I to loosen "b" (clockwise).

3. Use tool II to adjust "a" (clockwise) to the appropriate position, and use tool I to tighten "b" (counterclockwise).

4. Fold the handlebar stem up, close the quick release lever and turn the handlebar stem clockwise to close the safety hook.

5. Shake the handlebar stem to see if the problem has been resolved.

If not, repeat step 2 and 3.

If it has, continue to step 6.

6. Return the scooter to the folded state and use tool I to tighten "c" (counterclockwise).

* Step 6 is mandatory.

a. Inner Hex Nut

b. Hex Stud

c. Hex Nut

Before adjustment, make sure the scooter is powered oﬀ and not charging.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xiaomi Mi Electric Scooter 1S Pro 2 Lite Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info