02
Battery & Charging
WARNING
• This product contains batteries that are only replaceable by skilled persons.
• This product can only be charged using an ATC01RR or BTC01RR power supply.
• Do not use any third-party batteries, power adapters or docking stations.
• Do not disassemble, repair or modify the battery, power adapter or the docking station.
• Do not charge the vacuum or install the docking station near heat sources or in humid areas
(such as radiators or bathrooms).
• Do not wipe the adapter or the docking station with a wet cloth, nor touch them with wet
hands.
• If the power cord is damaged or broken, immediately stop using it and contact after-sales
service.
• If the vacuum is not going to be used for an extended period of time, please fully charge it,
unplug its power supply, and place it in a cool and dry place. Make sure that you recharge it
once every three months to avoid the battery to over-discharge.
The lithium ion battery inside this product contains substances harmful to the
environment.
ATTENTION:
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing the battery.
• The battery is to be disposed of safely.Please do not discard waste batteries. Leave them to a
professional organization.
The following steps are only applicable for scrapping:
Removing the Battery:
1. Remove the dust compartment and cyclone assembly, and remove the two screws on the
inner wall of the vacuum near the dust compartment release switch.
2. Remove the top fan filter, and remove the screw used for fixing the cover of the handle on the
inner wall of the vacuum.
3. Open the handle cover along the gap at the top of the handle and gently slide it up to remove
the cover.
4. Unplug the 3 connectors inside the handle from the baery.
5. Slide out the baery pack.
This version is for private use only and should not be distributed.
