Bedienungsanleitung Xiaomi Mi Robot Vacuum-Mop 2 Pro (Seite 13 von 296) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

801236

Zoom out

Zoom in

Vorherige Seite

1/296

Nächste Seite

How to Use

Sleep mode

The vacuum-mop will automatically enter the sleep mode if it does not

work or be operated for more than 5 minutes in the non-charging state.

Press any buon or use the app to wake it up. The vacuum-mop will

automatically turn oﬀ if it is in sleep mode for more than 6 hours.

Note: The vacuum-mop will not enter sleep mode while on the charging dock.

Resuming the cleanup

The vacuum-mop has the feature of resuming the cleanup. If the

vacuum-mop starts running low on baery during a cleaning task, it will

automatically return to the charging dock to charge. Once the

vacuum-mop is fully charged, it will resume the cleanup where it le oﬀ. If

the cleanup is manually ended or if you move or operate the vacuum-mop

when it is being charged or returning to the charging dock, the cleanup

will not be resumed.

Returning to the dock to charge

When the vacuum-mop is on, press the buon to send the vacuum-mop

to the charging dock to charge. The vacuum-mop will automatically return

to the dock aer ﬁnishing a cleaning task, and the indicator will blink

white. If the vacuum-mop starts running low on baery while cleaning, it

will automatically return to the dock to charge and resume the cleaning

where it le oﬀ once it is fully charged.

Turning on/oﬀ

Press and hold the buon for 3 seconds until the indicator lights up,

and the vacuum-mop is turned on. When the vacuum-mop is paused and

not being charged, press and hold the buon for 3 seconds to turn it

oﬀ.

Vibrating mopping mode

When mopping, the vibrating mopping mode is enabled by default to

enhance the mopping eﬀect, and can beer remove water stains

compared with the standard mopping mode. This mode can be disabled

in the app. Once disabled, the vacuum-mop will switch to the standard

mopping mode.

Vacuuming or vacuuming & mopping

Turn the vacuum-mop on, and press the buon . Then the vacuum-mop

will automatically enter the vacuuming mode or vacuuming & mopping

mode according to the installed accessories.

Quick map creation

When turning on the vacuum-mop for the ﬁrst time, there is no map

available in the app. Place the vacuum-mop against the charging dock,

and then select "Quick map creation" in the app. The vacuum-mop will

begin to create a map without cleaning, and then it will automatically

return to the charging dock to complete and save the map.

Note: During the map creation process, do not move the vacuum-mop, and keep it

out of reach of children and pets.

Pausing

When the vacuum-mop is working, press any buon to pause it, and

press the buon to resume the cleaning. Press the buon to

end the current cleaning and send the vacuum-mop back to the charging

dock.

Adding water or cleaning mop pad during cleanup

If you need to add more water to the water tank or clean the mop pad

during a cleaning task, press any buon to pause the vacuum-mop. Then

you can remove the water tank to add water or clean the mop pad. Aer

adding water or cleaning the mop pad, reinstall the water tank and mop

pad, and press the buon to resume the cleaning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xiaomi Mi Robot Vacuum-Mop 2 Pro Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info