Bedienungsanleitung Xiaomi Mi Robot Vacuum-Mop P (Seite 10 von 225) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

795978

Zoom out

Zoom in

Vorherige Seite

1/225

Nächste Seite

If the vacuum-mop encounters an error during operation, the

indicator will blink red and you will hear a voice alert. To check for a

solution, please refer to the Troubleshooting section.

If no action is taken within 5 minutes, the vacuum-mop will automatically

enter sleep mode.

Fault Status

Four suction modes are available in the Mi Home/Xiaomi Home app:

Silent, Standard, Medium, and Turbo. The default mode is Standard.

Cleaning Preferences

In the Do Not Disturb mode, the vacuum-mop will not resume cleanup,

perform scheduled cleanup, or issue voice alerts.

Do Not Disturb Mode is enabled by default and can be disabled via the

app.

Do Not Disturb Mode

The vacuum-mop will automatically enter sleep mode aer 5 minutes

of inactivity. To wake it up, press any buon or use the app.

• The vacuum-mop will not enter sleep mode while on the charging

dock.

• The vacuum-mop will automatically turn oﬀ aer being in sleep

mode for 12 hours.

Sleep Mode

The vacuum-mop has a feature of resuming cleanup. If the

vacuum-mop starts running low baery during a cleaning task, it will

automatically return to the charging dock to recharge. Once the

vacuum-mop is fully charged, it will resume cleanup where it le oﬀ. If

the cleaning task is manually ended while the vacuum-mop is

charging, cleanup will not be resumed.

Resuming Cleanup

You can use the app to set up the zoned area, then the vacuum-mop

will clean up within the zoned area you selected.

Zoned Area

You can set a speciﬁed area on the map via the app, then the

vacuum-mop will automatically navigate to the area and clean a

square-shaped area of 2 × 2 meters.

Clean There

You can schedule cleaning times in the app. The vacuum-mop will

automatically start cleaning at the scheduled times, then return to

the charging dock aer the cleaning is completed.

Note: The vacuum-mop will not do the scheduled cleanup during the Do Not

Disturb period if Do Not Disturb mode is enabled.

Scheduled Cleanup

You can set up virtual walls and restricted areas in the app to prevent the

vacuum-mop from entering areas you wish not to clean.

Virtual Walls/Restricted Areas

You can use the app to enable smart mapping. This allows the

vacuum-mop to automatically update its map aer completing a

cleaning task and recharging.

Smart Mapping

If you need to add more water to the vacuum-mop or clean the

mop pad during a cleaning task, press any buon to pause the

vacuum-mop, then remove the 2-in-1 dust compartment with

water tank. Aer adding water or cleaning the mop pad, reinstall

the 2-in-1 dust compartment with water tank and mop pad, then

press the buon to resume the cleaning task.

Adding Water or Cleaning Mop Pad During Cleaning

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xiaomi Mi Robot Vacuum-Mop P Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info