Bedienungsanleitung Xiaomi Mi Robot Vacuum Mop (Seite 7 von 182) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

739044

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

How to Use

Adding Water or Cleaning Mop Pad During Cleaning

Note: The vacuum-mop will automatically enter sleep mode aer encountering an error if no

action is taken within 10 minutes. If the vacuum-mop has an error, placing it onto the charging

dock will end the current cleaning task.

Note: The vacuum-mop will not enter sleep mode until it is fully charged.

If you need to add more water to the vacuum-mop or clean the mop

pad during a cleaning task, press any buon to pause the

vacuum-mop, then remove the mopping module. Aer adding water

or cleaning the mop pad, reaach the mopping module, then press

the buon to resume the cleaning task.

Fault Status

If the vacuum-mop encounters an error during operation, the power

indicator will blink orange and you will hear a voice alert. To check for

a solution, please refer to "Troubleshooting".

Sleep Mode

The vacuum-mop will automatically enter sleep mode aer 10 minutes

of inactivity, then the power and charging indicators will go oﬀ. To

wake up the vacuum-mop, press any buon.

Note: When the vacuum-mop is paused, placing it onto the charging dock will end the current

cleaning task. If you need to continue cleaning, try to start the vacuum-mop in the same position

where it was paused.

Note: Activating Spot Clean mode will end the current cleaning task of the vacuum-mop.

Press any buon to pause the vacuum-mop during cleaning.

To resume cleaning, press the buon . Press the buon to end

the current cleaning task and the vacuum-mop will go back to the

charging dock.

Upon activation, the vacuum-mop will

methodically clean each room in an S-shape

paern, then ﬁnish by cleaning along edges

and walls to ensure a thorough job. When

the vacuum-mop is done cleaning, it will

automatically return to the charging dock to

recharge.

When the vacuum-mop is in standby mode

or paused, press and hold the buon for

3 seconds to start Spot Clean mode. In this

mode, it will clean a square-shaped area of

1.5 ×1.5 meters directly around the

vacuum-mop. When the spot cleaning is

done, the vacuum-mop will automatically

return to its original location and shut oﬀ.

Pausing

Cleaning Methods

1.5m

Note: The vacuum-mop cannot be turned oﬀ while charging.

Press and hold the buon to turn on the vacuum-mop. Once the

power indicator turns solid white, the vacuum-mop is in standby mode.

To turn oﬀ the vacuum-mop, press and hold the buon while the

vacuum-mop is stationary. Turning oﬀ the vacuum-mop will end the

current cleaning task.

Note: The vacuum-mop cannot start cleaning if the baery level is low. Please recharge it before

cleaning.

If the vacuum-mop starts running low on baery during a cleaning task, it will automatically return

to the charging dock to recharge. Once the vacuum-mop is fully recharged, it will resume cleaning

where it le oﬀ.

Please tidy up any cables on the ﬂoor before cleaning (including the charging dock power cable) to

prevent the vacuum-mop from geing caught on them, which could accidentally shut oﬀ electrical

appliances or cause damage to objects or cables.

By default, if the vacuum-mop completes a cleaning task in less than 10 minutes, it will clean the

area a second time.

Pulsing orange: Baery level is less than 15%. Pulsing white: Baery level is more than 15%.

Note: The vacuum-mop will automatically return to its original cleaning position if it cannot locate

the charging dock. If this happens, please manually place the vacuum-mop onto the charging dock.

Press the buon to start cleaning.

Press any buon to pause during cleaning.

Turn On/Oﬀ

Cleaning

Auto mode: The vacuum-mop will automatically return to the charging

dock to recharge aer it ﬁnishes cleaning.

Manual mode: When the vacuum-mop is paused, press the buon

to send it back to the charging dock.

The indicator of the buon is pulsing when the vacuum-mop is

charging.

Charging

Installation

Note: When the vacuum-mop is charging or not in use, remove the mopping module, pour out all

remaining water in the tank, and clean the mop pad to prevent mildew or lingering odors.

Aer the vacuum-mop ﬁnishes cleaning and returns to the charging

dock, press the side clips of the mopping module inward and pull to

remove the module.

6. Remove the Mopping Module

Note: The mop pad should be cleaned aer every 30 minutes of use to ensure adequate water ﬂow

and cleaning eﬀectiveness.

Once the power indicator of the vacuum-mop changes from pulsing

white to solid white, it is fully charged. Press the buon , or you can

use the Mi Home/Xiaomi Home app to start cleaning.

5. Start Cleaning

9 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xiaomi Mi Robot Vacuum Mop Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Xiaomi Mi Robot Vacuum Mop

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info