Bedienungsanleitung Xiaomi Smart Tower Heater Lite (Seite 6 von 112) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

795931

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

How to Use

Before Use

On/Standby

Scheduled Standby

Enabling/Disabling Oscillation

Enabling/Disabling the Child Lock

• Check if the heater is in good condition, and make

sure the power cord is not damaged or broken.

• Use a 220–240 V AC electrical outlet with a rated

current of at least 10 A. It is recommended to plug

the power cord into a wall socket, and do not share

the same power strip with other appliances.

• Press the power button on the back of the heater

before use. When the heater makes a notification

sound, it is connected to power.

• This heater is an electric appliance for close use.

When using the heater to blow air directly, it is

recommended to place it one to two meters away

from you for optimal heating performance.

• Press the on/standby button to turn on the heater.

• Press the on/standby button when the heater is

on, the heater will dissipate heat for 30 seconds,

then enter standby mode.

Note: After the heater has been running in the

natural mode for 30 seconds, pressing the on/

standby button can make the heater directly enter

standby mode.

• Press the on/standby button when the heater

is dissipating heat, the heater will return to the

previously used settings.

Note: When planning not to use the heater for a long

time, make sure the heater is in standby mode and

then turn off the heater and unplug the power cord.

• Press the scheduled on/off button to cycle

through the scheduled standby times: one hour,

two hours, four hours, eight hours, and off.

• If no operation is performed within three seconds

after the scheduled standby time is selected, the

indicator will display the expected temperature. If

no expected temperature is set, the indicator will

go out.

• After the scheduled standby time is selected, the

indicator will show the remaining time once you

press the scheduled on/off button. You can press

the button again within three seconds to cycle

through the scheduled standby times.

Note: If the room temperature is higher than

the expected temperature in the constant

temperature mode, the heater may switch to the

natural mode.

• Press the oscillation button to enable or disable

the oscillation mode.

• To enable or disable the child lock function, press

and hold the oscillation button and the mode

button simultaneously for seven seconds.

• The child lock function can also be disabled by

turning on the heater again after disconnecting it

from power or unplugging the power cord.

Switching the Mode

Adjusting the Expected Temperature

• Press the mode button to cycle through the modes

of constant temperature, hot, warm, and natural.

• Press the temperature button to cycle through the

expected temperatures of 22°C, 24°C, 26°C, and

28°C.

• After the expected temperature is set, the heater

will automatically enter the constant temperature

mode. Other modes do not support the settings of

the expected temperature.

Enabling/Disabling the Wi-Fi

• To enable or disable Wi-Fi, press and hold the

scheduled on/off button and the oscillation

button simultaneously for seven seconds.

Resetting the Wi-Fi

• Press and hold the scheduled on/off button

and the temperature button simultaneously

for seven seconds. When the heater enters the

network configuration mode, the Wi-Fi is reset

successfully.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xiaomi Smart Tower Heater Lite Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info