Bedienungsanleitung Xoro HSD 7510 (Seite 7 von 41) (Englisch)

496998

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

English

15. Outdoor Antenna Grounding - If an outside antenna or cable system is connected to

the product, be sure the antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges. Article 810 of the Nati-

onal Electrical Code, ANSI/NFPA 70, provides information with regard to proper

grounding of the mast and supporting structure, grounding of the lead-in wire to an

antenna discharge unit, size or grounding conductors, location of antenna-discharge

unit, connection to grounding electrodes, and requirements for the groundin

telectrode.

16. Lightning - For added protection for this product during a lightning storm, or when it

is left unattended and unused for long periods of time, unplug it from the wall outlet

and disconnect the antenna or cable system. This will prevent damage to the p r o -

duct due to lightning and power-line surges.

17. Power Lines - An outside antenna system should not be located in the vicinity of

overhead power lines or other electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside antenna system, extreme

care should be taken to keep from touching such power lines or circuits as contact

with them might be fatal.

18. Overloading - Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

19. Object and Liquid Entry - Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or short-out parts that could

result in a fire or electric shock.Never spill liquid of any kind on the product.

20. Servicing - Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

21. amage Requiring Service - Unplug this product from the wall outlet and refer servi-

cing to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the operating instructions. Ad-

just only those controls that are covered by the operating instructions as an improper

adjustment of other controls may result in damage and will often require extensive

work by a qualified technician to restore the product to its normal operation.

e. If the product has been dropped or damaged in any way, and

f. When the product exhibits a distinct change in performance this indicates a need for

service.

22. Replacement Parts - When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or have the

same characteristics as the original part. Unauthorized substitutions may result in

fire, electric shock, or other hazards.

SAFETY INFORMATION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xoro HSD 7510 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Xoro HSD 7510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info