800733

XQ Max 8DP001330 Seite 4

4
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
4 | Instructions for use – Stand-up paddleboard
3
DETACHABLE SKEG ON BACKSIDE OF SUP
BOARD
It is recommended to use the detachable skeg in
deep water, where it will allow you to move forward
in a straight line. Do not use it in shallow water
because then the skeg can hit the bottom. The Skeg
can be placed on the SUP board if this is inated or
deated. To assemble the skeg push the skeg in the
black part on the back side of the SUP board.
4
HOW DOES THE PRESSURE GAUGE METER
WORK?
A pressure gauge measures the pressure the pump
receives during the inating process. As air cannot
escape from the SUP board, pressure builds up and
since the air cannot get out, this pressure will be
shown on the pressure gauge. The gauge expresses
the pressure in PSI and BAR.
The pressure gauge of the pump starts working
when the pressure in the SUP board is high enough,
which may take some time. This means that you
have to pump a lot of air into the SUP board before
the meter starts working. The meter will start
working from the moment you start to feel higher
pressure in the SUP board.
ASSEMBLY INSTRUCTIONS INCLUDED PADDLE
The included paddle consists of 3 pieces.
To adjust the paddle to the required length:
- Insert the bottom of pole 2 in to the top of pole 3.
This can be xed when the pin on pole 2 is clicked
in the hole of pole 3.
- Open the button on top of pole 2 by pulling the
button.
- Insert the bottom of pole 1 and choose the length
that suits you. Click the pin (behind the button) of
pole 2 in to the hole of pole 1.
- The paddle length is adjustable from minimum
length 1.70 mtr to maximum length 2.10 mtr.
HOW TO USE YOUR PADDLE
Don’t use the peddle as support to stand on the
SUP. The peddle is only allowed to be used for
peddling in the water and can break when it comes
in contact with the lake/sea-bed.
ATTACHING THE LEASH
Before you start to use the SUP board rst attach
included leash to the SUP board and yourself.
- Attach the leash to the metal ring on top of the
SUP board.
- Attach the other side of the lease to your ankle.
When you fall in the water the leash ensures that
the SUP board will not oat away.
MAINTENANCE SUP BOARD
- Clean and check the SUP board and all accessories.
Use a mild, non scouring cleanser.
- Make sure the SUP board is completely dry before
placing it in the backpack. Otherwise this may
cause mold, foul odor and the skin/hull or the
inside chambers of the SUP board will suer from
water damage.
REPAIRS
Although the SUP board has been manufactured of
a reinforced and tough material, it is still possible to
cause holes or cracks when the SUP board is handled
improperly. For the repair of a small damage a repair
kit is included.
- Prepare a round patch with repair material with
correct measurements.
- Clean the repair material and the area around the
leak with alcohol.
- Apply 3 thin, even coats of glue to both the surface
of the board and the repair material. Wait 5
minutes between each coat.
- After the 3rd coat, wait 10-15 minutes before
applying the repair material. Use a handroller
to apply the repair material evenly. Pay special
attention to the edges.
- Wait at least 24 hours before re-inating.
- Many tutorials on social media regarding SUP
repairs.
5
HOW TO USE THE VALVE WRENCH TO FIX
LEAKAGE PROBLEMS IN VALVE LOCATION:
A. Deate the board until the top and bottom skin
(PVC) have collapsed.
B. Grab the valve base (3) with your hand through
the bottom layer and hold steady while inserting
the valve tightening wrench (1) into the valve top
(2) and turn the wrench rmly clockwise until
proper sealing is guaranteed.
C. If tightening of valve top (2) was still not
successful unscrew the valve top (2) entirely
turning it counterclockwise and inspect the PVC
opening hole for any wrinkles, tears or debris.
D. If the PVC opening hole looks intact add a thin
layer of repair adhesive (PVC glue) onto the PVC.
E. Tighten the valve as described in B and let the
glue dry in a warm well-ventilated area for 24
hours.
F. After 24 hours inate the SUP to 15PSI and leave
inated for 72 hours to check for air leakage.
6
ADDITIONAL INFO
WHAT IS DROPSTITCH MATERIAL?
All inatable SUP Boards use drop stitch. This
technology ensures that the bottom and top of a
SUP remain connected to each other. Drop stitch
is the technology used to produce a Stand Up
Paddle Board. Hundreds of threads that connect
the top and bottom of a SUP form the drop-stitch
technology. These wires ensure that an inatable
supboard remains in its original form, even under
high pressure.
DEFORMATION
As drop-stitch material is sewed vertically with
threads, there is always 1 place on the SUP with a
“deformation”. This deformation, can be explained
logically by the placement of the valve. Due-to-
the valve, no “DROP-STITCH wires” are present at
this location. This, is a deformation inherent to the
design of the SUP and does not have any impact on
the quality.
AIRBUBBLES UNDER THE EVAPAD
The SUPs EVA-PAD can contain 1 or several groups
of tiny bubbles. As this product is completely
handmade, this is completely normal. The layers of
PVC and EVA are glued together by hand. Although
the production process is in a dust-free area some
small particles can settle on the PVC during
manufacturing. These air bubbles are cosmetic, and
will not grow or aect the performance of your SUP
board.
NL INSTRUCTIE
Deze gebruiksaanwijzing dient zorgvuldig
te worden gelezen en opgevolgd. Als u het product
aan derden geeft, dient u ook deze documenten te
overhandigen. Volg de juiste volgorde op voor het
oppompen / leeglaten van het SUP board.
INHOUD
1 Opblaasbaar SUP board
1 Rugzak
1 Aluminium in lengte verstelbare peddel
1 Hand Pomp
1 Koord.
1 afneembare vin
1 Reparatie set
1
1. H3 Ventiel
2. Koord voorzijde
3. EVA Antislip bekleding
4. Handgreep
5. Metaal ring
6. Afneembare vin
WAARSCHUWING
- Stand up peddelen kan zeer gevaarlijk en fysiek
veeleisend zijn. De gebruiker van dit product moet
begrijpen dat deelnemen in stand up peddelen
serieuze verwondingen of de dood tot gevolg kan
hebben.
- Raadpleeg een gecerticeerde of gelicenseerde
… 4 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für XQ Max 8DP001330 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info