800738

XQ Max 8DP001370 Seite 3

3
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
Stand-up paddleboard – Instructions for use | 3
UK INSTRUCTION
These operating instructions should be
read and followed up carefully before utilizing the
SUP board. When passing the product on to a third
party, always make sure that the documentation is
included. Take special care to follow up the correct
sequence of inating/deating of the assembling
procedure.
CONTENTS
1 Inatable Stand-Up paddleboard
1 Backpack
1 Aluminium adjustable paddle
1 Hand Pump
1 Leash.
1 Detachable skeg
1 Repair kit
1
1. H3 Valve
2. Front bungee cord
3. Non slip EVA pad
4. Carry handle
5. Metal ring
6. Detachable skeg
WARNING
- SUP can be very dangerous and physically
demanding. The user of this product should
understand that participating in stand up paddling
may involve serious injury or death.
-
Seek SUP instruction from a licensed or certied
instructor.
-
Always check weather forecasts prior to using
the SUP board. Never use the SUP board in
thunderstorms and lighting conditions.
- Always use appropriate protective gear and wear
a personal otation device. Wear the correct
protective clothing for the conditions such
as a wetsuit or a UV top. Cold water and cold
weather can result in hypothermia. Always carry
identication.
- Wear a helmet when appropriate.
- Do not exceed the maximum weight capacity of
150 kg.
- Do not operate the SUP board under the inuence
of drugs and/or alcohol.
- This model is designed to be used in at waters
(lake, rivers, sea shore) in standing and seating
position. It is not recommended to use the SUP
board in high waves nor for surng.
- Beware of oshore winds and currents as they can
take you out to sea.
- Check your equipment prior to each use for signs of
wear, leaks or failure.
- Protect this article from extreme temperatures,
sun and humidity.
- Tie the included leash to your SUP board at all times.
- Children should always be under adult supervision.
- Always inform someone your paddling route, the
time and place of departure and your intended
time and place of arrival. Paddling alone is not
recommended.
- Watch out for other beach users especially
swimmers and children. Make sure you keep the
SUP board and paddle under control at all times.
- Never leave your SUP board for an extended period
of time on a warm surface like a beach or other
surfaces. This can cause damage to your board.
- Dispose of the item in accordance with local,
current regulations at a collection point.
PREPARATIONS FOR INFLATING THE SUP
BOARD
Remove all sharp edged and pointed objects from the
surface in order to avoid damaging the SUP board.
ASSEMBLY INSTRUCTIONS / INFLATION / DEFLATION
Inate the SUP board with the included hand pump.
2
1. Valve cap
2. Button
3. Valve base
- Unscrew the valve cap 1. Push the button 2 in
and
turn approximately 90 degrees so it is in the
“OUT” position.
- Insert the pump hose end piece and inate it until
you will reach the required pressure. After ination
tighten all the valve cap (clockwise). Only the valve
cap can ensure nal AIR TIGHTNESS.
-
To release air from the SUP board, remove the
valve cap
1
and push the button
2
in and turn
approximately 90 degrees so it is in the “IN” position.
The correct pressure for this SUP board is
maximum 1 bar / 15 PSI (=1000 mBar)
DO NOT EXCEED THIS !!
Using an electrical pump or air compressor is at your
own risk. This can lead to damaging the SUP board.
Lock pin
DETACHABLE SKEG ON BACKSIDE OF SUP BOARD
It is recommended to use the detachable skeg in deep
water, where it will allow you to move forward in a
straight line. Do not use it in shallow water because
then the skeg can hit the bottom. The Skeg can be
placed on the SUP board if this is inated or deated.
To assemble the skeg push the skeg in the black part
on the back side of the SUP board. To lock the skeg
push the lock pin in the skeg base hole.
4
HOW DOES THE PRESSURE GAUGE METER
WORK?
A pressure gauge measures the pressure the pump
receives during the inating process. As air cannot
escape from the SUP board, pressure builds up and
since the air cannot get out, this pressure will be
shown on the pressure gauge. The gauge expresses
the pressure in PSI and BAR.
The pressure gauge of the pump starts working
when the pressure in the SUP board is high enough,
which may take some time. This means that you
have to pump a lot of air into the SUP board before
the meter starts working. The meter will start
working from the moment you start to feel higher
pressure in the SUP board.
ASSEMBLY INSTRUCTIONS INCLUDED PADDLE
The included paddle consists of 3 pieces.
To adjust the paddle to the required length:
- Insert the bottom of pole 2 in to the top of pole 3.
This can be xed when the pin on pole 2 is clicked
in the hole of pole 3.
- Open the button on top of pole
2
by pulling the button.
- Insert the bottom of pole 1 and choose the length
that suits you. Click the pin (behind the button) of
pole 2 in to the hole of pole 1.
- The paddle length is adjustable from minimum
length 1.70 mtr to maximum length 2.10 mtr.
HOW TO USE YOUR PADDLE
Don’t use the peddle as support to stand on the
SUP. The peddle is only allowed to be used for
peddling in the water and can break when it comes
in contact with the lake/sea-bed.
ATTACHING THE LEASH
Before you start to use the SUP board rst attach
included leash to the SUP board and yourself.
- Attach the leash to the metal ring on top of the
SUP board.
- Attach the other side of the lease to your ankle.
When you fall in the water the leash ensures that
the SUP board will not oat away.
MAINTENANCE SUP BOARD
- Clean and check the SUP board and all accessories.
Use a mild, non scouring cleanser.
-
Make sure the SUP board is completely dry before
placing it in the backpack. Otherwise this may cause
mold, foul odor and the skin/hull or the inside chambers
of the SUP board will suer from water damage.
REPAIRS
Although the SUP board has been manufactured of
a reinforced and tough material, it is still possible to
cause holes or cracks when the SUP board is handled
improperly. For the repair of a small damage a repair
kit is included.
3
3 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für XQ Max 8DP001370 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info