Bedienungsanleitung XQ Max 8FE-000000 (Seite 10 von 82) (Alle Sprachen)

800723

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

10 | Instructions for use – Multi-functional home gym

2. Place the lower beam behind the rear cross beam

with the footrest placed downwards.

3. Fasten the row plate and the lower beam by

placing the bolt through the row plate, the rear

cross beam and the lower beam and fasten with

the nut and the washer.

STEP 7 – PLATE CARRIAGE AND CHROME LAT

PULL TUBE SECTIONS

REQUIRED PARTS

NO. DESCRIPTION QTY

1 M10x75 Bolt 1

4 Nut 1

5 Washer 2

17 Lat pull tube 1

26 Plate carriage 1

INSTRUCTION

1. Place the lat pull tube over the top of the lower

beam, align the holes.

2. Fasten the lat pull tube by placing the bolt

through the lat pull tube and the lower beam,

fasten with the nut and the washer. Place the

washer on both sides of the bolt.

3. Place the plate carriage over the lat pull tube

and slowly move downwards till it can rest on

the lower beam. Assure the side with the plate

handles is facing away from the article.

STEP 8 – TOP BEAM

REQUIRED PARTS

NO. DESCRIPTION QTY

1 M10x75 Bolt 1

2 M10X70 Bolt 2

4 Nut 3

5 Washer 4

10 Bolt plate 1

24 Top beam 1

INSTRUCTION

1. Place the top beam over the rear cross beam

while facing the short side downwards and the

long side towards the article.

2. Place the short side of the top beam over the lat

pull tube and fasten with the bolt (1), nut and the

washers. Place the washer on both sides of the

bolt.

3. Place the bolt plate on the downside of the rear

cross beam and align the holes.

4. Place the bolt (2) through the top beam, rear

cross beam and bolt plate and fasten with the nut

and the washers. Place the washer on both sides

of the bolt.

STEP 9 – TOP CABLE

REQUIRED PARTS

NO. DESCRIPTION QTY

14 Cable 28,5 CM 1

INSTRUCTION

1. Place the side of the cable with the bolt at the end

through the downside hole of the top beam.

2. Take the cable out of the second hole of the top

beam and place through the third hole of the top

beam (on the short side).

3. Pull the cable downwards and fasten the bolt of

the cable on to the plate carriage.

4. Pull the subsequent cable downwards from the

third hole of the top beam (on the short side) till

the cable is stringent and in line with the lat pull

tube.

STEP 10 – PULLEY SECTION

REQUIRED PARTS

NO. DESCRIPTION QTY

1 M10x75 Bolt 3

3 M10X45 Bolt 2

4 Nut 5

5 Washer 4

9 Pulley peg 6

11 Pulley 5

13 Musketon hook 1

27 Pulley brace 2

INSTRUCTION

1. Place three pulleys into the top beam. Start with

the installation of the rst pulley at the end of

long part of the top beam. Place the pulley from

below into the designated hole so the cable is

placed above the pulley.

2. Fasten the pulley by placing the bolt (1) through

the top beam and the pulley and fasten with the

nut and the washer.

3. Repeat this step for the remaining two designated

holes in the top beam.

4. Fasten the pulley brace on the pulley by placing

the bolt (3) through the pulley brace and the

pulley and fasten with the nut and the washer.

5. Place a pulley on the cable which is hanging

between the long and short part of the top beam.

The cable should be facing downwards from the

pulley.

6. Combine the fastened pulley brace and pulley to

the pulley installed in step 5. Fasten these two

parts together by placing the bolt (1) through the

pulley brace and the pulley and fasten with nut

and washer.

7. Place one Musketon hook at the beginning of the

cable.

STEP 11 – LOWER CABLE AND PULLEY

REQUIRED PARTS

NO. DESCRIPTION QTY

3 M10X45 Bolt 1

4 Nut 1

5 Washer 2

11 Pulley 1

12 Chain 2

13 Musketon hook 4

15 Cable 27,2 CM 1

INSTRUCTION

1. Place the end of the cable through the row plate

and through the lower pulley hanging between

the long and short part of the top beam.

2. Place one Musketon hook through the designated

hole at the end of the cable.

3. Attach the chain to the end of the cable by using

the Musketon hook.

4. Place one Musketon hook at the end of the chain

and fasten the cable to the designated hole at the

lower beam.

5. Place one Musketon hook through the designated

hole at the beginning of the cable.

6. Attach the chain to the beginning of the cable by

using the Musketon hook.

7. Place one Musketon hook at the beginning of the

chain.

8. Place the pulley through the hole of the row plate

so the cable is pushed out.

9. Fasten the pulley on the rear cross beam by

placing the bolt through the rear cross beam and

pulley and fasten with the nut and the washer.

Place the washer on both sides of the bolt.

STEP 12 – BAR CONNECTOR

REQUIRED PARTS

NO. DESCRIPTION QTY

1 M10x75 Bolt 1

4 Nut 1

5 Washer 2

34 Bar connector 1

INSTRUCTION

1. Fasten the bar connector to the upright frame

by placing the bolt through the bar connector

and the upright frame and fasten with the nut

and the washer. Place the washer on both sides

of the bolt. Make sure the moving part of the bar

connector is facing downwards.

STEP 13 – ACCESSORIES

REQUIRED PARTS

NO. DESCRIPTION QTY

22 Longer safety bar 1

23 J-hooks 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

XQ Max 8FE-000000 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info