Bedienungsanleitung Xterra TR6.45 TREADMILL (Seite 5 von 28) (Englisch)

587182

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

TR6.45 Treadmill

Important Electrical Information

WARNING!

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any appliance with a

large motor, the GFCI will trip often. Route the power cord away from any moving part of the treadmill including

the elevation mechanism and transport wheels.

NEVER remove any cover without rst disconnecting AC power. If voltage varies by ten percent (10%) or more,

the performance of your treadmill may be affected. Such conditions are not covered under your warranty. If

you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing. See

Diagnosis Guide, page 22.

NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near a pool or

spa, or in any other high humidity environment. The temperature specication is 40 degrees celsius, and

humidity is 95%, non-condensing (no water drops forming on surfaces).

Circuit breakers: Some circuit breakers used in homes are not rated for high inrush currents that can occur

when a treadmill is rst turned on or even during normal use. If your treadmill is tripping the house circuit breaker

(even though it is the proper current rating) but the circuit breaker on the treadmill itself does not trip, you will

need to replace the home breaker with a high inrush type. This is not a warranty defect. This is a condition we as

a manufacture have no ability to control. This part is available through most electrical supply stores. Examples:

Grainger part # 1D237, or available online at www.squared.com part # QO120HM.

Grounding Instructions

This product must be grounded. If the treadmill’s electrical system should malfunction or breakdown

grounding provides a path of least resistance for electric current, reducing the risk of electric shock. This

product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an

appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock.

Check with a qualied electrician or serviceman if you are in doubt as to whether the product is properly

grounded. Do not modify the plug provided with the product if it will not t the outlet; have a proper outlet

installed by a qualied electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated

below. A temporary adapter that looks like the adapter illustrated below may be used to connect this plug to a

2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should

be used only until a properly grounded outlet, (shown below) can be installed by a qualied electrician. The

green colored rigid ear-lug, or the like, extending from the adapter, must be connected to a permanent ground

such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal

screw.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xterra TR6.45 TREADMILL Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info