Bedienungsanleitung Xterra TR6.55 (Seite 5 von 24) (Englisch)

587184

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

TR6.55 Treadmill

WARNING!

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. As with any

appliance with a large motor, the GFCI will trip often. Route the power cord away from any

moving part of the treadmill including the elevation mechanism and transport wheels.

NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent

(10%) or more, the performance of your treadmill may be affected. Such conditions are not

covered under your warranty. If you suspect the voltage is low, contact your local power

company or a licensed electrician for proper testing. See Diagnosis Guide, page 26.

NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors,

near a pool or spa, or in any other high humidity environment. The temperature specification is

40 degrees c, and humidity is 95%, non-condensing (no water drops forming on surfaces).

Circuit breakers: Some circuit breakers used in homes are not rated for high inrush currents that

can occur when a treadmill is first turned on or even during normal use. If your treadmill is tripping

the house circuit breaker (even though it is the proper current rating) but the circuit breaker on the

treadmill itself does not trip, you will need to replace the home breaker with a high inrush type. This

is not a warranty defect. This is a condition we as a manufacture have no ability to control. This

part is available through most electrical supply stores. Examples: Grainger part # 1D237, or

available online at www.squared.com part # QO120HM.

This product must be grounded. If the treadmill’s electrical system should malfunction or

breakdown grounding provides a path of least resistance for electric current, reducing the risk of

electric shock. This product is equipped with a cord having an equipment-grounding plug. The

plug must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a

risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt

as to whether the product is properly grounded. Do not modify the plug provided with the

product if it will not fit the outlet; have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the

plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be

used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is

not available. The temporary adapter should be used only until a properly grounded outlet,

(shown below) can be installed by a qualified electrician. The green colored rigid ear-lug, or the

like, extending from the adapter, must be connected to a permanent ground such as a properly

grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal

screw.

Important Electrical Information

Grounding Instructions

Grounded Outlet

Grounding Pin Grounded Outlet Box

Metal Screw

Adapter

Tab of

Grounding

Screw

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xterra TR6.55 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info