Bedienungsanleitung Xterra TR800 TREADMILL (Seite 22 von 28) (Englisch)

587188

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

TR800 Treadmill

1. Attach the transmitter to the elastic strap using the interlocking button.

2. Adjust the strap as tightly as possible as long as the strap is not too tight to remain comfortable.

3. Position the transmitter with the logo centered in the middle of your torso facing

away from your chest (some people must position the transmitter slightly left of

center). Attach the nal end of the elastic strap by inserting the round end and,

using the locking parts, secure the transmitter and strap around your chest.

4. Position the transmitter directly below the pectoral muscles.

5. Sweat is the best conductor to measure very minute heart beat electrical signals.

However, plain water can also be used to pre-wet the electrodes (2 ribbed oval

areas on the reverse side of the belt and both sides of the transmitter). It’s also

recommended that you wear the transmitter strap a few minutes before your

work out. Some users, because of body chemistry, have a more difcult time in

achieving a strong, steady signal at the beginning. After “warming up”, this problem lessens.

6. Your workout must be within range - distance between transmitter/receiver – to achieve a strong steady

signal. The length of range may vary somewhat but generally stay close enough to the console to

maintain good, strong, reliable readings. Wearing the transmitter directly on bare skin assures you of

proper operation. If you wish, you may wear the transmitter over a shirt. To do so, wet the areas of the

shirt that the electrodes will rest upon.

Note: The transmitter is automatically activated when it detects activity from the user’s heart. Additionally, it

automatically deactivates when it does not receive any activity. Although the transmitter is water resistant,

moisture can have the effect of creating false signals, so you should take precautions to completely dry the

transmitter after use to prolong battery life (estimated transmitter battery life is 2500 hours). The replacement

battery is Panasonic CR2032.

Caution! Do not use this treadmill for heart rate programs unless a steady, solid actual heart

rate value is being displayed. High, wild and random numbers being displayed indicate a

problem.

Areas to look for interference which may cause erratic heart rate:

1. Microwave ovens, TV’s, small appliances, etc.

2. Fluorescent lights.

3. Some household security systems.

4. Perimeter fence for a pet.

5. Some people have problems with the transmitter picking up a signal from their skin. If you have problems

try wearing the transmitter upside down. Normally the transmitter will be oriented so the XTERRA Fitness

logo is right side up.

6. The antenna that picks up your heart rate is very sensitive. If there is an outside noise source,

turning the whole machine 90 degrees may de-tune the interference.

7. Another individual wearing a transmitter within 3’ of your machine’s console.

If you continue to experience problems contact us.

Wearing The Chest Strap

Erratic Operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xterra TR800 TREADMILL Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info