Bedienungsanleitung XtremeMac Tango TRXD (Seite 6 von 38) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

496971

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

the Dock wIll allow You to Power anD charge

Your IPoD/IPhone/IPaD whIle transmIttIng

over Bluetooth

1. Remove the dock, back support, screw and AC adapter

from the packaging and properly dispose of any packaging

materials.

2. Place unit on a level surface close to a power outlet following

the precautions listed in the safety warnings.

3. Place the back support with the tall edge facing outward on

the top of the dock aligning the center slit over the screw hole.

4. Place the screw over the slit and align with the hole on the

unit. Gently tighten about half way by turning the screw

clockwise. The back support should be able to slide to the

front and back loosely.

5. Carefully place your device into the dock connector and slide

the back support to ﬁt snuggly against your device.

6. Gently tighten the screw all the way to secure the back

support into place.

7. If located in the US, skip to step 10. If located outside the US,

select the appropriate wall adapter. If already attached to the

unit, skip to step 10.

8. Press the button under the wall adapter to release the adapter.

9. Gently slide in the appropriate wall adapter. You will hear a

click when it is properly locked into place.

10. Connect the AC adapter jack to the back of the unit and then

connect the other end of the adapter to a power outlet.

settIng uP the PowereD Dock

lIstenIng to Your IPoD/IPhone through the

Dock connector

1. If playing an iPhone, skip to the next step 3.

2. If playing an iPod classic, touch or nano, insert the included

adapter into the two holes behind the dock connector and

press ﬁrmly to ensure a proper connection.

3. Carefully place your device into the dock connector.

4. Press the on the top of the unit or the remote to power on

Tango TRX.

5. Press the source button on the top of the unit or on the remote

until the iPod logo is illuminated as the source.

6. Press play on the on the unit or on the remote. Use the

controls on the unit or the included remote to adjust the

volume and iPod functions.

Note: The unit will charge your device while docked.

lIstenIng to Your DevIce wIrelesslY over

Bluetooth

To listen to your music over the Bluetooth wireless connection,

you need to pair your device with Tango TRX.

1. Make sure your device has Bluetooth capability.

2. Press the on the top of the unit or the remote to power on

Tango TRX.

3. Follow the instructions listed in the manual of your device to

turn on the Bluetooth functionality to pair your device with

the unit.

4. Pair your device with the unit by selecting Tango TRX from

your Bluetooth listings on your device or selecting yes. If

prompted, enter 0000 as the passcode.

5. Press the source button on the top of the unit or the remote

until the LED under the Bluetooth logo is illuminated as

the source.

6. Press play on your device and use the control dial on the unit

or the remote to adjust the volume.

7. Use your device or the remote (for iPod/iPhone only) to control

music functions.

Note: Once you have successfully paired your device with Tango TRX, you will not

need to repeat the above steps. For each use, ensure that the unit source is set to

Bluetooth and that Bluetooth is enabled on your device.

receIvIng a call whIle transmIttIng musIc

over Bluetooth

The music will automatically stop when the phone begins to

ring and the ringer will sound over the speakers. If you would

like to continue the call over Bluetooth using Tango TRX as a

speakerphone, answer the phone and select Tango TRX as the

phone source. Next, make sure you are close enough to the unit to

speak into the microphone which is located behind the center of

the speaker grill. Use the control dial on the unit or the remote to

adjust the volume.

1. Dock connector

2. Back support

3. Screw

4. AC power jack

5V 2.1A

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

XtremeMac Tango TRXD Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info