Bedienungsanleitung Yaesu DR-2XE (Seite 29 von 56) (Englisch)

674723

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

DR-2X / DR-2XE Operating Manual 27

C4FM DIGITAL CONTROL

• Requires the optional LAN Unit “LAN-01A” for digital voice storage and playback functions.

• Set the operation mode to “AUTO” or “FIX DIGITAL”.

• The transceivers compatible with the remote-control are the FTM-400D, FTM-100D and FTM-3200D.

• Remote control with C4FM digital can be done only when the transceiver DP-ID has been registered to the

DR-2X/DR-2XE in advance. Remote operation cannot be performed with a transceiver when the DP-ID has

not been registered, so you can securely manage repeaters.

• When the remote operation is accepted, the repeater responds and the operation completion is shown by

the respective functions on the screen of the mobile transceiver.

DTMF (for analog FM mode)

• Requires the optional voice guide unit “FVS-2” for analog voice storage and playback functions.

• Set the operation mode to “AUTO”.

• Any transceiver with DTMF can be used.

• When the remote operation is accepted, the CW ID of the operation that has been completed by the respec-

tive function is transmitted on the repeater downlink frequency.

Remote Control Command List (Default setting)

Function Description

C4FM

Analog FM

C4FM

Analog FM

Code

Display of the

transceiver screen

CW ID

ACTIVATE

Activate the repeater operation

of CH-A and CH-B.

1111 1111 Activate Set O

DEACTIVATE (LOCAL)

Deactivate the local repeater

operation.

2222 2222 Local Deactivate Set S

DEACTIVATE (ALL)

Deactivate all the linked repeat-

ers.

2221

ø1

- All Deactivate Set -

FIX DIGITAL

Set the repeater to C4FM mode.

3333



3333

DIGI/DIGI Set DD

AUTO

Set the repeater to AMS (Auto-

matic Mode Select) mode.

Both analog FM and C4FM digi-

tal signals operate.

4444



4444

AUTO/AUTO Set AA

HIGH TX POWER

Set the transmit power to HI (50

W).

0050



0050

High Power Set H

MID TX POWER

Set the transmit power to MD

(20 W).

0020



0020

Mid Power Set M

LOW TX POWER

Set the transmit power to LO (5

W).

0005



0005

Low Power Set L

REC MESSAGE

Record the voice message.

PTT

ø2



5555

REC Completed R

PLAY MESSAGE

Play (Stop) the voice message.

ø2



6666

PLAY Completed R

CLEAR MESSAGE

Clear the voice message.

ø2



7777

CLEAR Completed R

EMERGENCY CALL OFF

When accessing the repeater

by a transceiver with registered

DP-ID, select the downlink from

all the linked repeaters or the

downlink in accordance with the

DG-ID setting.

8888

ø1

- EMERGENCY OFF -

EMERGENCY CALL ON

9999

ø1

- EMERGENCY ON -

ø1: It is only available with the C4FM digital.

ø2: When the C4FM digital mode, press the “PTT”, “P2”, or “P3” key.

When using Analog FM mode, hold down PTT, press the “” key on the microphone, and then enter the

DTMF code.

When remote control is activated by a Digital Code, the status is shown on the transceiver display.

When remote control is activated by DTMF, the status is responded with CW ID on the Downlink frequency.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yaesu DR-2XE Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info