Bedienungsanleitung Yaesu FT-450 (Seite 5 von 104) (Englisch)

444588

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Page 3FT-450 OPERATION MANUAL

AGC BAND BAND TUNE F

SQL/RF GAIN AF GAIN

A/B

LOCKFAST

A=B

ODE

LAR

SPLIT

STEP

SCAN

PMS

RCL

STO

VOX

C.S

V/M

RONT

ANEL

WITCHES

AND

NOBS

VOICE/C.S Switch

Press this button to activate one of the 52 functions, which

can be assigned via Menu Item “PNL-C.S.”

Press the

[

]

button followed by this button to announce the

current operating frequency (with resolution to the displayed

100 Hz digit) and operating mode.

TUNE Switch

Press this button momentarily to

toggle the ATU-450 Internal Automatic

Antenna Tuner on/off.

Press and hold in this button to begin

the automatic Tuning.

F Switch

Press this button to activate the alternate key

functions of the six command buttons located

on the upper right corner of the front panel.

Press and hold this button for one second to

engage the “Menu” mode.

METER/DIM Switch

Press this button to change the meter

function in the transmit mode as fol-

lows.

PO ➟ ALC ➟ SWR ➟ PO

PO: Indicates the average power

output level.

ALC: Indicates the relative ALC volt-

age.

SWR:Indicates the Standing Wave

Ratio (Forward/Reflected).

Press the

[

]

button followed by this

button to enable adjustment of the

display dimmer level by the

[

DSP/

SEL

]

knob. When the adjustment is

complete, press this key again.

HOME/RCL Switch

Press this button to recall the Quick Memory Bank

memory for operation. Press this button again to

return to the VFO or Memory mode.

Press the

[

]

button followed by this button to recall

the “Home” (favorite frequency) channel. The home

channel default settings are 29.30000 MHz for the

HF Band and 51.00000 MHz for the 6 m band.

STEP/SPLIT Switch

Press this button to activate split fre-

quency operation between VFO-A,

used for reception and VFO-B, used

for transmission (or vice versa).

Press the

[

]

button followed by this

button to enable setting of the fre-

quency step with the

[

DSP/SEL

]

knob.

When the selection is complete, press

this key again.

MW/V/M Switch

This button toggles frequency control between the

VFO and the memory system.

Press the

[

]

button followed by this button to copy

the current operating data from the VFO into the cur-

rently selected memory channel.

VOX/STO Switch

Press this button to copy the operating in-

formation (frequency, mode, bandwidth,

and also repeater direction/shift frequency

and CTCSS functions on the FM mode) into

the Quick Memory Bank.

Press the

[

]

button followed by this button

to activate the VOX (voice-actuated trans-

mitter switching) feature in the SSB, AM,

and FM modes.

PMS/SCAN Switch

Press this button to initiate the

upward scanning of VFO fre-

quencies or memory chan-

nels.

Press the

[

]

button followed

by this button to engage the

Programmable Memory Scan,

(PMS) which limits scanning

within a particular frequency

range.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yaesu FT-450 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info