Bedienungsanleitung Yaesu FT-450 (Seite 44 von 104) (Englisch)

444588

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Page 42 FT-450 OPERATION MANUAL

SSB/AM MODE TRANSMISSION

VOICE MEMORY

(

SSB/AM/FM MODES

)

You may utilize the Voice Memory capability of the FT-450 for repetitive messages. The Voice Memory system

includes two memories (VM1 and VM2) capable of storing up to 10 seconds of voice audio each. The maximum

that both memories can hold is 10 seconds.

Recording Your Own Voice in Memory

1. Assign the “VM1REC” (Voice Recording) function

to the

[

VOICE/C.S

]

button using the procedure in

the box below.

2. Select the LSB, USB, AM, or FM mode using the

[

MODE

]

[

MODE

]

buttons.

2. Press the

[

VOICE/C.S

]

button. A “VM1 REC” no-

tation will appear in the display.

3. Press and hold the microphone’s PTT switch, the

radio display will count down.

(“VM1

–

3”  “VM1

–

2”  “VM1

–

1”  “VM1 10”

......

)

5. When the display Shows “VM1 10”, speak into

the microphone in a normal voice level to record

the message (such as “CQ DX, CQ DX, this is W

6 Delta X-Ray Charlie, W 6 Delta X-Ray Charlie,

Over”). Remember that the time limit for record-

ing is 10 seconds.

6. Release the PTT switch to terminate the mes-

sage storage process.

Checking Your Recording

1. Assign the “VM1MONI” (Voice Monitoring) func-

tion to the

[

VOICE/C.S

]

button using the proce-

dure in the box below.

2. Select the LSB, USB, AM, or FM mode using the

[

MODE

]

[

MODE

]

buttons.

3. Press the

[

VOICE/C.S

]

button, and you will hear

the contents of the voice memory you just re-

corded.

4. You may adjust the playback level of the record-

ing by the

[

AF GAIN

]

knob.

Transmitting the Recorded Message

1. Assign the “VM1TX” (Voice Transmitting) func-

tion to the

[

VOICE/C.S

]

button using the proce-

dure in the box below.

2. Select the LSB, USB, AM, or FM mode using the

[

MODE

]

[

MODE

]

buttons.

3. Press the

[

VOICE/C.S

]

button to transmit the con-

tents of the voice memory you just recorded.

4. You may adjust the playback level of the record-

ing by the

[

AF GAIN

]

knob.

How to assign a function to the

[

VOICE/C.S

]

button

1. Press and hold the

[

]

button for one second

to enter the Menu Mode. The “ ” icon

will appear on the display.

2. Rotate the

[

DSP/SEL

]

knob to select Menu

Item “PNL-C.S”.

3. Press the

[

DSP/SEL

]

knob to enable adjust-

ment of this Menu Item. The “ ” icon

will be blinking.

4. Rotate the

[

DSP/SEL

]

knob to select the de-

sired function.

5. Press the

[

DSP/SEL

]

knob. The “ ” icon

returns to appear continuously.

6. Press and hold the

[

]

button for one second

to return to normal operation.

[

]

button

[

DSP/SEL

]

knob

[

VOICE/C.S

]

button

[

MODE

]

[

MODE

]

button

[

AF GAIN

]

button

ADVICE

You may perform the Voice Memory operation

with the memory slot “VM2 (VM2REC,

VM2MONI, and VM2TX)” instead of memory

slot “VM1 (VM1REC, VM1MONI, and VM1TX)”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yaesu FT-450 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info