674725
24
Zoom out
Zoom in
Vorherige Seite
1/47
Nächste Seite
24
FT-70DR/DE Advance Manual
Reset All
Use this procedure to restore all settings to their original factory defaults. All Memories
will be cleared by this procedure.
CAUTION!
Resetting will clear all memories and all settings to the factory default. Be sure to make a note of the
Memory Channel and Set Mode settings, etc. before resetting.
1. Turn the transceiver OFF.
2. Press and hold the
[
MODE
]
key,
[
HM/RV
]
key and
the
[
AMS
]
key simultaneously, while turning the
transceiver ON.
The beep sounds and the confirmation screen is
displayed.
3. Press the
[
F
]
key to sound beep and reset all fac-
tory defaults.
After resetting all defaults, the call sign input
message appears on the LCD. Set the call sign.
(See the operating manual)
To cancel the resetting, press any key except the
[
F
]
key.
Set Mode Reset
The Set mode only reset will restore all the Set Mode Items to the default settings. The
user memory channels will not be reset.
CAUTION!
Resetting will clear all Set Mode MENU items to the factory default. Be sure to make a note of any
user customized Set Mode settings, etc. before resetting.
1. Turn the transceiver OFF.
2. Press and hold the
[
MODE
]
key and the
[
V/M
]
key
and turn the transceiver ON simultaneously.
The beep sounds and the confirmation screen is
displayed.
3. Press the
[
F
]
key to sound a beep and reset the
Set Mode settings.
To cancel the resetting, press any key except the
[
F
]
key.
The Set Mode Reset may not reset the following Set Mode items.
To restore all of the following Set Mode items to default, perform All Reset:
1 ANT.ATT 8 BELL 9 BNK.NAM 11 CLK.SFT 13 DCS.INV
17 DP-ID 19 DT SET 33 MEM.NAM 35 NM/FRQ 36 OPN.MSG
37 PAG.ABK 38 PAG.CDR 39 PAG.CDT 41 PSWDWT 44 RF SQL
46 RPT.FRQ 47 RX MOD 49 SCM.WTH 50 SCV.WTH 54 SQL.EXP
62* (61) W/N.DEV 64* (63) MYCALL
*: USA Version
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT-70DE wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yaesu FT-70DE

Yaesu FT-70DE Bedienungsanleitung - Deutsch - 44 seiten

Yaesu FT-70DE Zusatzinformation - Deutsch - 47 seiten

Yaesu FT-70DE Bedienungsanleitung - Englisch - 44 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info