Bedienungsanleitung Yaesu FT-DX9000 (Seite 37 von 156) (Englisch)

674754

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Page 35FT DX 9000D OPERATION MANUAL

FAST/RX Switch

FAST Switch

When the

A/B switch (# ) is pushed, and the Or-

ange lamp to the right of the

CLAR/VFO-B knob

lights up, the CLAR/VFO-B knob (# ) will be con-

trolling the Sub (VFO-B) frequency; pressing the

FAST/RX switch will increase the tuning rate by a

factor of 10.

RX Switch

When the CLAR switch (# ) is pressed (and its

imbedded LED is illuminated), pressing the FAST/

RX switch applies the programmed Clarifier offset

to the Main (VFO-A) receive frequency. Press the

FAST/RX switch once more to return the Main re-

ceiver to the frequency shown on the main frequency

display field; the Clarifier offset will still be present,

though, in case you want to use it again. To cancel the

Clarifier offset, press the B.MODE/CLEAR switch

(see details in # below).

BAND/MHz / TX Switch

BAND/MHz

When the A/B switch (# ) is pressed, and the Or-

ange lamp to the right of the CLAR/VFO-B knob

lights up, pressing the BAND/MHz switch allows

you to rotate this knob for selection of the Amateur

band to be used for the Sub (VFO-B) band.

TX Switch

When the CLAR switch (# ) is pressed (and its

imbedded LED is illuminated), pressing the BAND/

MHz / TX switch applies the programmed Clarifier

offset to the Main (VFO-A) transmit frequency. Press

the FAST/RX switch once more to return the trans-

mitter to the Main (VFO-A) frequency shown on the

main frequency display field; the Clarifier offset will

still be present, though, in case you want to use it again.

To cancel the Clarifier offset, press the B-MODE/

CLEAR switch (see details in # below).

B.MODE/CLEAR Switch

B.MODE Switch

When the A/B switch (# ) is pressed, and the Or-

ange lamp to the right of the CLAR/VFO-B knob

lights up, pressing the B.MODE/CLEAR switch al-

lows you to rotate this knob for selection of the oper-

ating mode to be used on the Sub (VFO-B) band.

CLEAR Switch

When the CLAR switch (# ) is pressed (and its

imbedded LED is illuminated), pressing the

B.MODE/CLEAR switch clears out any frequency

offset you have programmed into the Clarifier regis-

ter (thereby setting the offset to “Zero”).

A/B Switch

The A/B switch controls the determines whether

the actions of the

CLAR/VFO-B knob will be ap-

plied to the Main (VFO-A) band (“CLAR” option),

or the Sub (VFO-B) band (“VFO-B option”).

Pressing this switch once causes the Orange lamp to

the right of the

CLAR/VFO-B knob (# ) to light

up; in this case, rotation of the CLAR/VFO-B knob

affects operation on the Sub (VFO-B) band (tuning,

etc.). Pressing the A/B switch once more causes the

Orange lamp to turn off; in this instance, rotation of

the CLAR/VFO-B knob affects operations associ-

ated with the Main (VFO-B) band (Clarifier function,

etc.).

[F1] ~ [F7]/DISP Keys

[F1] ~ [F7] Key

These keys are used for selection of a variety of func-

tions, depending on the TFT operation page selected.

The actual selection available at any given time is

shown on the TFT, just above the function key.

DISP (Display) Key

This key is used for selection of the desired TFT op-

eration page.

BAND Key

These keys allow one-touch selection of the desired

Amateur band (1.8 ~ 50 MHz).

What's more, the [0] ~ [9] keys may be used for direct

entry of a desired operating frequency during VFO

operation.

TFT Display (see page 40)

This 6.5-inch TFT display is used for viewing and

control of a variety of features, and it includes pages

including a World Map, World Clock, Spectrum

Scope, SWR and Transmitter Status, Log Book, Au-

dio Scope and Oscilloscope, Memory Channel list-

ing, and Menu listings, plus much more.

FRONT PANEL CONTROLS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yaesu FT-DX9000 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info