Bedienungsanleitung Yaesu FT-DX9000 (Seite 59 von 156) (Englisch)

674754

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Page 57FT DX 9000D OPERATION MANUAL

Keyboard Frequency Entry (# )

You may enter operating frequencies, for

either the Main (VFO-A) or Sub (VFO-

B) bands, using the front panel band/fre-

quency selection keys.

Example 1:

Enter 14.250.00 MHz into the Main (VFO-A) band:

1. Press the [ENT] key to engage the direct frequency

entry process. Now, beginning with the “10 MHz” digit

of the frequency (the leftmost digit), we will enter the

required digits of the frequency.

2. Press, in order, the digits of the operating frequency,

using the BAND keys (which have the frequency-

entry digit or decimal point on the right side of the

slash bar). In this example, enter

[1.8/1]«[7/4]«[50/.]«[3.5/2]«[10/5]

[28/0]«[28/0]«[28/0]«[28/0]

The decimal point after the “MHz” portion of the fre-

quency must be entered, but no decimal point is re-

quired after the “kHz” portion.

3. Press the [ENT] key once more. A short “beep” will

confirm that the frequency entry was successful, and

the new operating frequency will appear on the Main

(VFO-A) frequency display fields.

Example 2:

Enter 7.100.000 MHz into the Sub (VFO-B) band:

1. Press the [V/B] key.

2. Press the [ENT] key to engage the direct frequency

entry process. Now, beginning with the “10 MHz” digit

of the frequency (the leftmost digit), we will enter the

required digits of the frequency to be entered into the

Sub (VFO-B) band register.

3. Press, in order, the digits of the operating frequency,

using the BAND keys (which have the frequency-

entry digit or decimal point on the right side of the

slash bar). In this example, enter

[18/7]«[50/.]«[1.8/1]«[28/0]

[28/0]«[28/0]«[28/0]«[28/0]

4. Press the [ENT] key once more. A short “beep” will

confirm that the frequency entry was successful, and

the new operating frequency will appear on the Main

(VFO-A) frequency display fields.

Advice

H In the above examples, you will notice that the trail-

ing “zero” digits of the frequency were not entered. It

is not necessary to enter these trailing zeroes; just press

the [ENT] to terminate frequency entry, and they will

be entered automatically.

H If you attempt to enter a frequency outside the operat-

ing range of 30 kHz ~ 60 MHz, the microprocessor

will ignore the attempt, and you will be returned to

your previous operating frequency. If this happens,

please try again, taking care not to repeat the error in

the frequency entry process.

Ë Using the CLAR/VFO-B knob (# ), you may

change the Main (VFO-A) band frequency in 1 MHz

steps. If you first press

and hold in the BAND/

MHz key for two sec-

onds, the 1 MHz steps

will be applied to the

Sub (VFO-B) band in-

stead. The imbedded

LED in the BAND/

MHz key will glow Red in the latter case.

When tuning in 1 MHz steps, clockwise rotation of

the CLAR/VFO-B know will increase the frequency,

while counter-clockwise rotation will decrease the fre-

quency.

Ë Using the UP/DOWN switches of the optional

MD-200A8X Base Station Microphone

The UP/DOWN switches on the

optional MD-200A8X Base Station

Microphone may also be used for

manually scanning upward or

downward in frequency, respec-

tively.

The microphone’s UP/DOWN

switches utilize the tuning steps of

the Main Tuning Dial (# ) ;

moreover, when the microphone’s

[FAST] key is pressed, the tuning rate increases by a fac-

tor of ten, in a manner similar to the effect of the

transceiver’s front-panel [FAST] key.

MORE FREQUENCY NAVIGATION TECHNIQUES

DOWN switche

UP switche

Advice

In the Am and FM modes, you may independently set the

tuning steps when using the UP/DOWN switches. To set

new tuning steps, use Menu items “TUNING 132 AM CH

STEP” and “TUNING 133 FM CH STEP.”

MODE UP DWN FST+UP FST+DWN

LSB, USB,

+10Hz -10Hz +100Hz -100Hz

CW, RTTY,

PKT(LSB)

AM, FM,

+5kHz -5kHz +50kHz -50kHz

PKT(FM)

CONVENIENT FEATURES

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yaesu FT-DX9000 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info