674768
15
Zoom out
Zoom in
Vorherige Seite
1/173
Nächste Seite
15
Before Using the Transceiver
Names and Functions of Controls
󰚜
DATA terminal*
To use the clone function, connect to another
FT2DR/DE with an optional clone cable (CT-
168).
When updating the firmware, connect to your
PC using a USB cable.
* For instruction to update the firmware, access
our website.
Connect the optional camera-equipped
microphone (MH-85A11U) to this terminal.
Connect an external GPS to this terminal.
󰚧
MIC/SP jack*
Connect a speaker microphone or earpiece
microphone to this jack.
The waterproof protection cannot be attained
when an external microphone is connected.
Do not connect any microphone which is
not specified by Yaesu. A failure can result.
󰚨
EXT DC IN jack*
When charging the battery pack, connect the
battery charger (PA-48 or SAD-14B) to this jack.
In the USA/EXP market, connect an external
power supply adapter with a cigarette lighter
plug (SDD-13) or an external power cable (E-
DC-6) to this jack.
Do not connect any battery charger which
is not specified by Yaesu. A failure can
result.
*: When the included antenna and battery pack are
installed and the MIC/SP jack, EXT DC IN jack, DATA
terminal, and micro SD slot are securely covered with
rubber caps, the FT2DR/DE meets the waterproofing
performance conforming to IPX5 (See page 13).
Touch Screen Display
This is the A-band display area.
This is the B-band display area.
Displays touch keys.
Displays mode.
In VFO mode, “VFO” is displayed.
In Memory mode, “MR” and the channel
number are displayed.
Display Bar indicates the volume level.
Displays the transmit output icon, the S
meter and the PO meter levels.
S meter: Displays the received signal
strength in 9 steps.
PO meter: Displays the transmit power level
in 4 steps.
H I: High power (5W)
L 3: LOW 3 power (2.5W)
L 2: LOW 2 power (1W)
L 1: LOW 1 power (0.1W*
1
)
Displays the time.
Displays the frequency shift direction during
repeater operation (
see page 52).
-: Minus shift
+: Plus shift
@: Split operation
lights when the mute function is active
( see page 44).
Displays the frequency.
Displays icon types.
: Lights when Auto Power Off is active
( see page 145).
: Lights when DTMF function is
enabled ( see page 103).
: Lights when GPS is acquired ( see
page 86).
: Lights when GPS Log Function is
enabled ( see page 89).
: Lights when a microSD memory card
is inserted ( see page 29).
The battery condition is displayed in 8
steps.
: Full battery power
: Battery is depleted. Charge battery.
: (When blinking) Charge battery
immediately.
*
1
: European version (VHF: 0.05W)
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT2DR wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info