674747
122
Zoom out
Zoom in
Vorherige Seite
1/140
Nächste Seite
Page 120 FT
DX
1200 OPERATING MANUAL
RX DSP GROUP
107 APF WIDTH
Function Selects the Bandwidth of the $udio 3eak
Filter.
$vailable Values 1$552W0('IU0WI'(
'efault Setting 0('IU0
108 CONTOUR LEVEL
Function $djusts the gain of the Contour ¿lter.
$vailable Values -40 a 0 a 0 dB
'efault Setting -1
109 CONTOUR WIDTH
Function $djusts the Q-factor of the Contour ¿lter.
$vailable Values 1 a 11
'efault Setting 10
110 DNR LEVEL
Function Set the 'igital 1oise 5eduction response.
$vailable Values 1 a 1
'efault Setting 3
111 IF NOTCH WIDTH
Function Selects the bandwidth of the 'S3 12TCH
¿lter.
$vailable Values 1$552W WI'(
'efault Setting WI'(
112 HF CW SHAPE
Function Selects the passband characteristics of the
'S3 ¿lter for the CW mode on the HF band.
$vailable Values S2FT SH$53
'efault Setting S2FT
S2FT 3rimary importance is attached to the phase of
the ¿lter factor.
SH$53 3rimary importance is attached to the
amplitude of the ¿lter factor.
113 HF CW SLOPE
Function Selects the shape factor of the 'S3 ¿lter for
the CW mode on the HF band.
$vailable Values ST((3 0('IU0 G(1TL(
'efault Setting 0('IU0
114 6M CW SHAPE
Function Selects the passband characteristics of the
'S3 ¿lter for the CW mode on the 0 0H] band.
$vailable Values S2FT SH$53
'efault Setting S2FT
S2FT 3rimary importance is attached to the phase of
the ¿lter factor.
SH$53 3rimary importance is attached to the
amplitude of the ¿lter factor.
115 6M CW SLOPE
Function Selects the shape factor of the 'S3 ¿lter for
the CW mode on the 0 0H] band.
$vailable Values ST((3 0('IU0 G(1TL(
'efault Setting 0('IU0
116 HF PSK SHAPE
Function Selects the passband characteristics of the
'S3 ¿lter for the 3S. mode on the HF band.
$vailable Values S2FT SH$53
'efault Setting SH$53
S2FT 3rimary importance is attached to the phase of
the ¿lter factor.
SH$53 3rimary importance is attached to the
amplitude of the ¿lter factor.
117 HF PSK SLOPE
Function Selects the shape factor of the 'S3 ¿lter for
the 3S. mode on the HF band.
$vailable Values ST((3 0('IU0 G(1TL(
'efault Setting 0('IU0
118 HF FSK SHAPE
Function Selects the passband characteristics of the
'S3 ¿lter for the FS. mode on the HF band.
$vailable Values S2FT SH$53
'efault Setting SH$53
S2FT 3rimary importance is attached to the phase of
the ¿lter factor.
SH$53 3rimary importance is attached to the
amplitude of the ¿lter factor.
119 HF FSK SLOPE
Function Selects the shape factor of the 'S3 ¿lter for
the 3S. mode on the HF band.
$vailable Values ST((3 0('IU0 G(1TL(
'efault Setting 0('IU0
MENU MODE
122

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FTDX1200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info