674764
30
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
30
Setup (Menu) Mode
FTM-3100R Operating Manual
Menu Item Function Available Values Default
15: LCD DMMR
Setting of the front panel display illumi-
nation level.
LEVEL 1/2/3/4 LEVEL 4
16: LOCK
Selects the Control Locking Lockout
combination.
KEY+DIAL/PTT/
KEY+PTT/DIAL+PTT/
ALL/KEY/DIAL
KEY+DIAL
17: MIC GAIN
Adjust the microphone gain level. LEVEL 1 to 9 LEVEL 5
18: MEM NAME
Programming an Alpha/Numeric label for
a Memory Channel.
--- ---
19: MW MODE
Selects the method of selecting of chan-
nels for Memory Storage.
NEXT CH/LOWER CH NEXT CH
20: OPEN MSG
Selects the Opening Message that ap-
pears when the radio is powered ON.
OFF/DC/MESSAGE MESSAGE
21: PAG CD-R
Setting the Receiver Pager Code for
the Enhanced CTCSS Paging & Code
Squelch function.
--- 05 47
22: PAG CD-T
Setting the Transmitting Pager Code for
the Enhanced CTCSS Paging & Code
Squelch function.
--- 05 47
23: PRG P1
Programming the function assigned to
Microphone
[
P1
]
key.
SQL OFF
HOME
WX CH
CD SRCH
SCAN
T CALL
TX POWER
Setup Menu Item #1 to
44
SQL OFF
24: PRG P2
Programming the function assigned to
Microphone
[
P2
]
key.
HOME
25: PRG P3
Programming the function assigned to
Microphone
[
P3
]
key.
CD SRCH
26: PRG P4
Programming the function assigned to
Microphone
[
P4
]
key.
ø
27: RF SQL
Adjusts the RF Squelch threshold level. OFF/S1 to S8 OFF
28: RPT ARS
Activates/Deactivates the Automatic Re-
peater Shift feature.
ON/OFF ON
29: RPT FREQ
Sets the magnitude of the Repeater Shift. 0.00 - 150.00 (MHz) 0.60 MHz
30: RPT SFT
Sets the Repeater Shift direction. -RPT/+RPT/SIMPLEX SIMPLEX
31: SCAN RSM
Selects the Scan Resume mode.
BUSY
/
HOLD
/2-10 (SEC) 5.0 SEC
32: SCAN SKP
Selects the Memory Scan mode. OFF/SKIP/SELECT OFF
33: SQL EXP
Sets the squelch type separately for
transmission and reception.
ON/OFF OFF
34: SQL TYPE
Selects the Tone Encoder and/or Decod-
er mode.
TONE/TSQL/DCS/
RV TONE/PAGER/OFF
OFF
35: STEP
Sets the frequency synthesizer steps.
AUTO/5/6.25/10/12.5/15
/20/25/50/100 (kHz)
AUTO
36: TEMP
Indicates the current temperature inside
the transceiver.
--- ---
37: TONE FRQ
Setting of the CTCSS Tone Frequency. 67.0 to 254.1 (Hz) 100.0 HZ
38: TOT
Sets the Time-Out Timer. 0.5 to 10.0 (MIN)/OFF 3.0 MIN
39: TS MUTE
Enables/Disables the receiver audio out-
put while the Tone Search or DCS Search
Scanner is activated.
ON/OFF ON
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FTM-3100R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info